FRAME GP-TELESCOPING RECOIL 3854728 - Caterpillar

Probable Causes
Leaks in the core of oil cooler
Cracks in the turbocharger housing or center section
Leaks in the cylinder head gasket
Damaged water seals
Cracks in the cylinder head
Cracks in a cylinder liner
Liner seals
Cracks in the cylinder blockRecommended Actions
Table 1
Troubleshooting Test Steps Values Results
1. Leaks in Core of Oil Cooler
A. Check for leaks in the oil cooler core.
Oil Cooler
Result: The oil cooler is not leaking.
Proceed to Test Step 2.
Result: The oil cooler is leaking.
Repair: Repair or replace the oil cooler.
Proceed to Test Step 8.
2. Liquid Cooled Turbochargers
A. Inspect the turbocharger housing and center section for cracks.
Turbocharger
Result The turbocharger housing or center section does not have cracks.
Proceed to Test Step 3.
Result The turbocharger housing or center section has cracks.
Repair: Make any repairs, as required.
Proceed to Test Step 8.
3. Leaks in the Cylinder Head Gasket
A. Inspect the cylinder head gasket for leaks.
Head Gasket
Result The cylinder head gasket is not leaking.
Proceed to Test Step 4.
Result The cylinder head gasket is leaking.
Repair: Replace the cylinder head gasket.
Proceed to Test Step 8.
4. Damaged Water Seals
A. Inspect the water seal for damage.
Water Seals
Result The water seal is not damaged.
Proceed to Test Step 5.
Result The water seal is damaged.
Repair: Repair or replace the damaged seal.
Proceed to Test Step 8.
5. Cracks in the Cylinder Head
A. Check for cracks in the cylinder head.
Cylinder Head
Result The cylinder head is not damaged.
Proceed to Test Step 6.
Result The cylinder head is damaged.
Repair: Repair or replace the damaged cylinder head.
Proceed to Test Step 8.
6. Cracks in a Cylinder Liner
A. Check for cracked cylinder liners.
B. Check the liner seals for damage.
Cylinder Liner and Seals
Result The cylinder liner or seal is not damaged or cracked.
Proceed to Test Step 7.
Result The cylinder liner or seal is damaged or cracked.
Repair: Repair or replace the damaged cylinder liner and seal.
Proceed to Test Step 8.
7. Cracks in the Cylinder Block
A. Inspect the cylinder block for cracks.
Cylinder Liner
Result The cylinder block is cracked.
Repair: Repair or replace the damaged cylinder block.
Proceed to Test Step 8.
8. Pressurize the Cooling System
A. Pressurize the cooling system. Refer to Systems Operation/Testing and Adjusting, "Cooling System - Test".
Leaks
Result: The test indicates that there is not a drop in pressure.
Proceed to Test Step 9.
Result: The test indicates a drop in pressure.
The leak still exists.
Make any repairs, as required.
Proceed to Test Step 9.
9. Change the Engine Oil
A. Drain the engine oil.
B. Refill the engine with clean oil.
C. Run the engine until the engine is at normal operating temperature.
D. Drain the engine oil, replace the oil filters, and refill the engine with clean oil.
Oil
Result: The engine oil was changed.
Return the unit to service.
If the procedure did not correct the issue, contact your Cat dealer Technical Communicator (TC). For further assistance, your TC can confer with the Dealer Solution Network (DSN).