AVSPARE.COM
parts catalog

FRAME AS 3904658 - Caterpillar



3904658 FRAME AS Caterpillar parts FRAME
Rating:
76
Alternative (cross code) number:
CA3904658
390-4658
3904658
Caterpillar 3904658 FRAME AS

Buy FRAME AS 3904658 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

To reduce the risk of fire or electric shock, install the UPS in an indoor environment that is free of conductive contaminants. This equipment is intended only for installations in a location that is restricted to qualified personnel.The UPS is subject to high leakage current. The UPS must be connected to an earth ground before the supply is connected.
Failure to connect the unit to a suitable grounding electrode will result in electrical shock and will cause injury or death.
High voltage is present when the enclosures of the UPS are open. The UPS should only be serviced by personnel that are qualified to work on equipment that contains high voltage.
Working with electrical circuits is hazardous. Bodily contact with electrical potential will cause personal injury or death. Ensure that personnel are trained in proper operating procedures in order to ensure safe operation.
Safety of Persons
The following sections contain safety precautions to observe as part of a general accident protection program.The UPS must be installed in a room with restricted access. Only qualified personnel should have access to the room. A UPS has a battery as an internal power source. The power outlets may be energized even if the UPS is disconnected from the AC power source.High voltage levels are present within the UPS. The UPS should be opened only by service personnel that are qualified. The UPS must have a proper ground connection to earth.
High voltage may be present. The power source must be disconnected before working on the equipment. Failure to disconnect the power source could result in injury or death. Verify that the equipment is not energized before performing any maintenance. This work must be performed by trained personnel with correct tools and procedures. Bodily contact with electrical potential will cause personal injury or death.
After power is removed, wait for 5 minutes before the UPS is opened. This action allows the capacitors to discharge. Ensure that the capacitors are at a zero energy level before performing work.Personal Protective Equipment (PPE) suitable to the work being performed must be worn when performing maintenance on the UPS.
High voltage may be present. Work on this equipment must be performed by authorized trained personnel. Failure to use appropriate Personal Protective Equipment (PPE) could result in serious injury or death. Personnel must be wearing PPE that meets regulatory requirements to protect the body for the work that is being performed.
High Leakage Current
Failure to connect the unit to a suitable grounding electrode will result in electrical shock and will cause injury or death.
The ground conductor must be connected first to avoid injury from high leakage current.Leakage current in a UPS is typically caused by input filters that are designed to protect against voltage surges. Some leakage current is allowed to pass from the input to a ground path or wire that leads to earth ground on the system. If there is no earth ground connected on the system, there is no place for this leakage current to pass.Battery Precautions
Never burn the battery. The battery may


Parts frame Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.