3C8092 FRAME GP-TRUCK Caterpillar parts
Rating:
Alternative (cross code) number:
CA3C8092
3C-8092
3C8092
CA3C8092
3C-8092
3C8092
Weight: 31 pounds 14 kg.
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01175712
Disconnect harness assembly (1) from turbocharger outlet pressure sensor (2).
Remove turbocharger outlet pressure sensor (2) and the O-ring seal. Installation Procedure
Illustration 2 g01175712Note: Check the O-ring seal for wear or damage. If necessary, replace the O-ring seal.
Install the O-ring seal on turbocharger outlet pressure sensor (2).
Install turbocharger outlet pressure sensor (2). Tighten turbocharger outlet pressure sensor (2) to a torque of 10 2 N m (88 18 lb in).
Connect harness assembly (1) to turbocharger outlet pressure sensor (2).
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01175712
Disconnect harness assembly (1) from turbocharger outlet pressure sensor (2).
Remove turbocharger outlet pressure sensor (2) and the O-ring seal. Installation Procedure
Illustration 2 g01175712Note: Check the O-ring seal for wear or damage. If necessary, replace the O-ring seal.
Install the O-ring seal on turbocharger outlet pressure sensor (2).
Install turbocharger outlet pressure sensor (2). Tighten turbocharger outlet pressure sensor (2) to a torque of 10 2 N m (88 18 lb in).
Connect harness assembly (1) to turbocharger outlet pressure sensor (2).