3C8093 FRAME GP - Caterpillar parts
Rating:
Alternative (cross code) number:
CA3C8093
3C-8093
3C8093
CA3C8093
3C-8093
3C8093
Weight: 0.03 pounds 0 kg.
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01175809
Disconnect harness assembly (1) from inlet air temperature sensor (2).
Remove inlet air temperature sensor (2). Remove the O-ring seal from inlet air temperature sensor (2). Installation Procedure
Illustration 2 g01175809Note: Check the O-ring seal for wear or for damage. If necessary, replace the O-ring seal.
Install the O-ring seal onto inlet air temperature sensor (2).
Install inlet air temperature sensor (2). Tighten inlet air temperature sensor (2) to a torque of 20 5 N m (15 4 lb ft).
Connect harness assembly (1) onto inlet air temperature sensor (2).
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01175809
Disconnect harness assembly (1) from inlet air temperature sensor (2).
Remove inlet air temperature sensor (2). Remove the O-ring seal from inlet air temperature sensor (2). Installation Procedure
Illustration 2 g01175809Note: Check the O-ring seal for wear or for damage. If necessary, replace the O-ring seal.
Install the O-ring seal onto inlet air temperature sensor (2).
Install inlet air temperature sensor (2). Tighten inlet air temperature sensor (2) to a torque of 20 5 N m (15 4 lb ft).
Connect harness assembly (1) onto inlet air temperature sensor (2).