FRAME AS-FRONT 4206700 - Caterpillar

Removal Procedure
Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "System Pressure - Release".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Note: Put identification marks on all hoses and on all wires for installation purposes. Plug all hoses. This will help to prevent fluid loss and this will help to keep contaminants from entering the system.
Illustration 1 g01139411
Remove bolts (1) and reposition cover (2) .
Illustration 2 g01139412
Disconnect harness assembly (3) and remove cover (2) .
Illustration 3 g01139413
Disconnect harness assemblies (4), (5), and (6) .
Illustration 4 g01139414
Disconnect harness assemblies (7), (8), and (9) .
Illustration 5 g01139434
Disconnect harness assemblies (10) and (11) .
Illustration 6 g01139440
Remove bolts (12) and electrohydraulic control assembly (13) .
Illustration 7 g01139441
Illustration 8 g01139442
Remove bolts (14). Remove electrohydraulic control (16) from cover assembly (15) .
Illustration 9 g01139443
Remove bolt (18). Repeat for the other side. Remove handle (17) .
Illustration 10 g01139444
Remove bolts (19) and position sensor (20) .
Illustration 11 g01139466
Remove bolts (21) and detent assembly (22) .