FRAME AS 4483107 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     180-3033     Repair Stand Set     2    
B     1U-9200     Lever Puller Hoist     1    
C     9S-3263     Thread Lock Compound     1    
Illustration 1 g01149530
Attach a suitable lifting device to track (6). Install track (6) under the machine. The weight of track (6) is approximately 910 kg (2006 lb). Raise the machine and remove Tooling (A). Lower the machine on track (6), as shown.
Illustration 2 g01149767
Attach Tooling (B) to track (6), as shown.
Start the machine and slowly move the propel lever to the FORWARD position. Use Tooling (B) to pull track (6) to the front of the machine.
Illustration 3 g01149780
Stop the machine and shut off the engine. Attach Tooling (B), as shown. Start the engine and slowly move the propel lever to the FORWARD position. Stop the machine and shut off the engine. Remove Tooling (B) .
Illustration 4 g01149783
Start the engine and slowly move the propel lever to the FORWARD position until the machine is positioned on the track, as shown. Stop the machine and shut off the engine.
Illustration 5 g01149788
Attach Tooling (B) to the track, as shown. Use Tooling (B) in order to pull the hydraulic tensioner cylinder inward.
Illustration 6 g01149801
Attach Tooling (B) to the track, as shown. Pull the track together and position track link (7), as shown.
Illustration 7 g01149804
Install backing plate (5). Apply Tooling (C) to two of bolts (4) and install two of bolts (4), as shown.
Illustration 8 g01149807
Remove Tooling (B) and apply Tooling (C) to the remaining bolts (4). Install remaining bolts (4). Tighten bolts (4) to a torque of 230 30 N m (170 22 lb ft).
Illustration 9 g01149507
Close valve (3). Start the engine in order to tighten the track. Shut off the engine.
Illustration 10 g01149477
Install track pad (2) and nuts (1). Tighten nuts (1) to a torque of 160 30 N m (118 22 lb ft).