FRAME AS 4737798 - Caterpillar

Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00799733
Position the heat exchanger on the engine. Install bolts (14) that secure heat exchanger (9) to the engine.
Illustration 2 g00799713
Install hoses to heat exchanger (9). Tighten hose clamps (10) and tighten hose clamps (11).
Illustration 3 g00799696
Position hose and tighten hose clamp (8) .
Install hose (7) to heat exchanger (9) and tighten hose clamps (6) .
Position hose (5) onto heat exchanger (9) and tighten hose clamp (4) .
Install hose (3) onto heat exchanger (9) .
Illustration 4 g00799722
Position manual sump pump (2) on heat exchanger (9) and install bolts (1) .End By: Fill the cooling system. If the engine uses diesel engine antifreeze/coolant, refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change". If the engine uses extended life coolant, refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".