FRAME AS 4750184 - Caterpillar

23. Put stator (21) in position on bearing (18) with the side marked impeller side facing up.24. Check the clearance [dimension (N)] between stator (21) and turbine (16) as follows: a. Put Tooling (B) in position on turbine (16) with the point of the dial indicator against surface (Y) of stator (21).b. Push stator (21) toward Tooling (B) until it makes contact with the turbine. Adjust the dial indicator until it is on zero.c. Slide the stator 180 degrees away from Tooling (B) until it makes contact with the other side