FRAME GP-MULCHING HEAD 4752795 - Caterpillar

MT900 Firmware
Version 1.10 for the MT900 improves operation with AccuGrade.LR410 Firmware
Version 1.99 for the LR410 laser receiver has a more reliable connection to the CAN bus.Note: CR2400 radios that are used with AccuGrade version 11 must use version 5.02 to operate properly. For an upgrade through MCGFlash, use a radio service cable and the reference that is listed above.Note: For a possible free upgrade, check the "Software Support Option" date. If the date is at least 15November 2008, the display can be upgraded. If the date is before 15November 2008, a new option key is required. A complimentary service support key is available through 15November 2009. An option key can be obtained at the following web site:www.techproductregistration.com
Refer to the reference that is listed above for more information.Minimum Level for Version of Software
Table 1
AccuGrade 3-D Software, Version 11.0    
Model    Part Number    Description    Version    
CD700     244-1716     Monitor Display Gp     11.00    
AS400C     226-9170     Position Sensor Gp     3.04    
AS400TC     276-6146     Position Sensor As     3.04    
AS450     312-0754     Position Sensor As     1.1    
AS460     312-0755     Position Sensor As     1.1    
RS400C     244-1714     Position Sensor Gp     1.89    
MS980C     244-1717     Satellite Receiver As     1.40    
MS990C     291-1913     Satellite Receiver As     3.81    
TC900B             2.80    
TC900C             3.20    
TC450             1.28    
TC2400C             1.08    
CRxxxx             5.02    
LR400C     226-2334     Laser Receiver Gp     1.83    
LR410C     253-8329     Laser Receiver Gp     1.99    
EM400C     226-2333     Mast Gp     1.86    
Loader             1.51    
MT900C     291-1915     Laser Target As     1.10    
ST400C     253-8330     Sonic Sensor As     1.03    Table 1 lists the minimum levels for the version of software that are required for the AccuGrade components. If version 11 of the AccuGrade software is used with system components that have older versions of software, the "Diagnostics" screen will be displayed. The "Diagnostics" screen will show the correct version of software that is required.ReferenceRefer to the applicable Systems Operation, Troubleshooting, Testing and Adjusting, "Display Firmware Upgrade" for detailed information of upgrading the firmware for the system.Note: If the software for the radio is not the required version level, the radio will be listed as "Not Found". The "Diagnostics" screen will continue to prompt the operator.
Illustration 4 g01832034
(1) "Downloads"Excluding the radio, the minimum versions of firmware are stored on the display under "upgrade firmware".The latest firmware is available on the section for downloads on SIS. The "Downloads" section is accessed by clicking on the "Downloads" link (1) on SIS. Refer to Illustration 4.This download is a self-extracting zip file that contains