4889283 FRAME AS-UNDERCARRIAGE Caterpillar parts
Rating:
Alternative (cross code) number:
CA4889283
488-9283
4889283
CA4889283
488-9283
4889283
Information:
Locomotive Power Connector "F"
The use of a power supply that is not isolated may result in failure of the electronic control module (ECM).The ECM must be powered by isolated power only.
Note: The Locomotive OEM is responsive for ensuring that the isolated power supply is provided.Connector "F" (37) provides 24 DCV to the junction box. Power is provided to the ECM, the service connector, and the Caterpillar Monitoring System. This connector is also for variable voltage that may be needed by systems that support the engine operation. Examples of the systems for support include ether, prelube, and relays for starting the engine.
Table 5
Locomotive Applications - Customer Connector "F"
Pin Number Function Type
1 Unassigned
2 Power Minus +Battery
3 Battery Positive +Battery
4 Unassigned
5 Battery Negative −Battery
6 Power Plus +Battery Customer Connector "G"
Connector "G" (36) is the primary interface between the locomotive control and the engine. Connector "G" provides the interface for the items that are listed below.
Shut down notify relay
Start enable relay
General alarm relay
Throttle
Fuel position multiplier
Feedback for the load
Serial data links
A speed signal that is independent of the engine ECM
Communication with the engine ECM for the remote emergency shutdown and normal engine shutdown
Engine protection override switch
Table 6
Locomotive Applications - Customer Connector "G"
Pin Number Function
1 Start Enable
2 Start Enable
3 Emergency Shutdown C
4 Engine Shutdown
5 Start Enable
6 Engine Shutdown
7 Emergency Shutdown D
8 General Alarm
9 Global CAT Link + (not used)
10 Shield
11 CAN −
12 CAN +
13 General Alarm
14 Local CAT Data Link (−)
15 Shutdown Notify (COM)
16 Shutdown Notify (NC)
17 Shutdown Notify (NO)
18 General Alarm (COM)
19 Load Feedback
20 - 23 Not Used
24 Torque Limit
25 Global CAT Data Link (−)
26 Not Used
27 Local CAT Data Link (+)
28 Not Used
29 Throttle
30 Magnetic Pickup (+)
31 Magnetic Pickup (−)
32 Shield
33 - 36 Not Used
37 Digital Reference
The use of a power supply that is not isolated may result in failure of the electronic control module (ECM).The ECM must be powered by isolated power only.
Note: The Locomotive OEM is responsive for ensuring that the isolated power supply is provided.Connector "F" (37) provides 24 DCV to the junction box. Power is provided to the ECM, the service connector, and the Caterpillar Monitoring System. This connector is also for variable voltage that may be needed by systems that support the engine operation. Examples of the systems for support include ether, prelube, and relays for starting the engine.
Table 5
Locomotive Applications - Customer Connector "F"
Pin Number Function Type
1 Unassigned
2 Power Minus +Battery
3 Battery Positive +Battery
4 Unassigned
5 Battery Negative −Battery
6 Power Plus +Battery Customer Connector "G"
Connector "G" (36) is the primary interface between the locomotive control and the engine. Connector "G" provides the interface for the items that are listed below.
Shut down notify relay
Start enable relay
General alarm relay
Throttle
Fuel position multiplier
Feedback for the load
Serial data links
A speed signal that is independent of the engine ECM
Communication with the engine ECM for the remote emergency shutdown and normal engine shutdown
Engine protection override switch
Table 6
Locomotive Applications - Customer Connector "G"
Pin Number Function
1 Start Enable
2 Start Enable
3 Emergency Shutdown C
4 Engine Shutdown
5 Start Enable
6 Engine Shutdown
7 Emergency Shutdown D
8 General Alarm
9 Global CAT Link + (not used)
10 Shield
11 CAN −
12 CAN +
13 General Alarm
14 Local CAT Data Link (−)
15 Shutdown Notify (COM)
16 Shutdown Notify (NC)
17 Shutdown Notify (NO)
18 General Alarm (COM)
19 Load Feedback
20 - 23 Not Used
24 Torque Limit
25 Global CAT Data Link (−)
26 Not Used
27 Local CAT Data Link (+)
28 Not Used
29 Throttle
30 Magnetic Pickup (+)
31 Magnetic Pickup (−)
32 Shield
33 - 36 Not Used
37 Digital Reference
Caterpillar SIS machinery equipment:
Caterpillar SIS
320 GC Excavator KTN00001-UP (MACHINE) POWERED BY C4.4 Engine »
488-9283
FRAME AS-UNDERCARRIAGE
320 GC Excavator DKJ00001-UP (MACHINE) POWERED BY C4.4 Engine »
488-9283
FRAME AS-UNDERCARRIAGE
320 Excavator HEX00001-UP (MACHINE) POWERED BY C4.4 Engine »
488-9283
FRAME AS-UNDERCARRIAGE
320 GC Excavator BR400001-UP (MACHINE) POWERED BY C4.4 Engine »
488-9283
FRAME AS-UNDERCARRIAGE
320 GC Excavator ZBT00001-UP (MACHINE) POWERED BY C4.4 Engine »
488-9283
FRAME AS-UNDERCARRIAGE
Caterpillar parts catalog:
Parts frame Caterpillar catalog:
4877025
FRAME AS
Caterpillar
Caterpillar
4877024
FRAME AS-BEARING
Caterpillar
Caterpillar
4872530
FRAME AS
Caterpillar
Caterpillar
4849155
FRAME AS-UNDERCARRIAGE
Caterpillar
Caterpillar
4849154
FRAME AS-UNDERCARRIAGE
Caterpillar
Caterpillar
4837110
FRAME GP-BLADE
Caterpillar
Caterpillar
5074832
FRAME AS-UPPER
Caterpillar
Caterpillar
5074831
FRAME GP-UPPER
Caterpillar
Caterpillar
4990100
FRAME GP-UNDERCARRIAGE
Caterpillar
Caterpillar
4990099
FRAME AS-UNDERCARRIAGE
Caterpillar
Caterpillar
4981082
FRAME AS-UNDERCARRIAGE
Caterpillar
Caterpillar
4889284
FRAME AS-UNDERCARRIAGE
Caterpillar
Caterpillar