FRAME AS-SUSP 5639043 - Caterpillar

5639043 FRAME AS-SUSP Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5639043
563-9043
5639043

Buy FRAME AS-SUSP 5639043 Caterpillar genuine, new aftermarket tractor parts with delivery

This part in 1 request: Show. This information for suppliers only!

#1558547 5639043

2025-07-11

Number on catalog scheme: 8

Caterpillar 5639043 Parts scheme FRAME AS-SUSP

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 189-0410 Shackle As 2 Start By:
Remove the heater and the air conditioning unit. Refer to Disassembly and Assembly, "Heater and Air Conditioning Unit - Remove".Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01227514
Remove plate (1) and floor mat (2) .
Illustration 2 g01227516
Remove bolts (3) and (5). Place cover (4) to the side.
Illustration 3 g01227517
Remove bolts (7) and place bracket assembly (6) to the side.
Illustration 4 g01227520
Remove duct (8) .
Illustration 5 g01227621
Remove bolts (9) .
Illustration 6 g01227925
Remove bolt (10). Remove guard (11) .
Illustration 7 g01227615
Remove bolt (13) and shaft (12) .
Illustration 8 g01227931
Disconnect harness assembly (14) that is located behind the operator seat.
Illustration 9 g01227932
Disconnect hose (15) that is located on the right front side of the cab for the windshield washer.
Illustration 10 g01227518
Illustration 11 g01227519
Attach Tooling (A) and a suitable lifting device to cab (16). The weight of cab (16) is approximately 250 kg (550 lb).
Remove bolts (17) that are located around the back of the operator seat and around the inside of cab. There are a total of 12 bolts. Remove cab (16) .