FRAME & BEARING AS 7T7189 - Caterpillar

Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Do not overfill the crankcase. Engine damage can result.
Check the engine oil level while the machine is parked on a level surface and the engine has been stopped for a minimum of 10 minutes.
Open the right rear access door. Secure the access door.
Illustration 1 g02493416
Remove dipstick (1). Wipe the oil off the dipstick and reinsert the dipstick.
Illustration 2 g00832222
Remove the dipstick and check the dipstick. The oil level should be between the "FULL" mark and the "ADD" mark.
Do not fill above the "FULL" mark on the dipstick.If the oil level is above the "FULL" Mark, the crankshaft might dip into the oil during engine operation. This will lead to excessively high oil temperatures. High oil temperatures can reduce the lubricating characteristics of oil.
Note: Refer to Operation and Maintenance Manual, "General Hazard Information" for information on Containing Fluid Spillage.
Remove oil filler plug (2) in order to add oil, if necessary. See Operation and Maintenance Manual, "Lubricant Viscosities". Note: If the oil is deteriorated or badly contaminated, change the oil regardless of the maintenance interval.
Clean the oil filler plug. Install the oil filler plug.
Close the access door.