AVSPARE.COM
parts catalog

FRAME AS 8G3406 - Caterpillar


8G3406 FRAME AS Caterpillar parts D4H
Rating:
13
Alternative (cross code) number:
CA8G3406
8G-3406
8G3406
Caterpillar 8G3406 FRAME AS
Weight: 0.87 pounds 0 kg.

Buy FRAME AS 8G3406 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 8G3406:

TRACK-TYPE TRACTOR  D4H   Caterpillar
Number on catalog scheme: 3
  For full view, you need register

Information:

Electric Horns
LOCATION OF SWITCH
1. Switch. 2. Fuse.
LOCATION OF HORNS
3. Horns.The switch (1) is between the steering control levers. The switch activates two electric horns (3) mounted in the radiator guard between the radiator and the grill.Back-Up Alarm
The back-up alarm (1) is mounted left rear of the tractor. When the directional control lever is put in the REVERSE position, a switch on the linkage activates the back-up alarm and a horn will sound.
LOCATION OF BACK-UP ALARM (NON-ROPS)
1. Back-up alarm.
LOCATION OF BACK-UP ALARM (WITH ROPS)
1. Back-up alarm.Parking Brake Control
LOCATION OF PARKING BRAKE CONTROL LEVER
1. Lever.The parking brake is controlled by lever (1) and the brake pedals. With the parking brake properly set the machine will not move.Transmission Safety Lock (Power Shift Only)
TRANSMISSION CONTROL
1. Transmission control lever. 2. Safety lever (Safety engaged).The transmission safety lock, when engaged, will keep transmission control lever (1) in the NEUTRAL position. A padlock can be installed to keep safety lever (2) in the SAFETY ON position.Seat Belt
The seat belt will hold the operator in the seat with a minimum amount of restriction to his movement. The seat belt is fastened to a stationary panel below and to the rear of the seat.Windshield Wipers, Windshield Washer Pump, Reservoir And Nozzle
The windshield wiper/washer switches (1) are mounted in the panel above the dash. Pump (2) and reservoir (3) are located inside the cab by the right hand door. The wiper on the left side is controlled by the switch on the left. The wipers for the middle and right side are controlled by the switch on the right.
LOCATION OF WIPER AND WASHER SWITCH
1. Switches. 2. Fuses.
LOCATION OF PUMP AND RESERVOIR
3. Pump. 4. Reservoir.
LOCATION OF WIPER ASSEMBLY AND NOZZLE
5. Nozzle. 6. Wiper.Windshield Wiper Motor And Linkage
The wiper motors are located behind the switch panel and mounted to the cab. The windshield wiper/washers are fused to protect the wiring.
LOCATION OF WIPER MOTORS
1. Wiper motors.

Caterpillar parts catalog:

Caterpillar parts catalog
D4H & D4H LGP TRACTORS / POWERSHIFT / 8PB00001-03999 (MACHINE) POWERED BY 3204 ENGINE
D4H & D4H LGP TRACTORS / DIRECT DRIVE / 2AC00001-03999 (MACHINE) POWERED BY 3204 ENGINE


Parts frame Caterpillar catalog:

3T3418 FRAME AS-END
1090, 1190, 1190T, 120M, 120M 2, 1290T, 12M 2, 12M 3, 12M 3 AWD, 1390, 140M, 140M 2, 140M 3, 140M 3 AWD, 14H, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16H NA, 16M, 2290, 235, 235D, 2390, 2391, 245, 2491...
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.