9G6038 FRAME AS-TRACK ROLLER Caterpillar parts
D6D, D6E, D6E SR, D6G, D6G SR, D6G2 XL
Rating:
Alternative (cross code) number:
CA9G6038
9G-6038
9G6038
CA9G6038
9G-6038
9G6038
Weight: 1115 pounds 505 kg.
TRACK-TYPE TRACTOR,
Compatible equipment models: 9G6038:
Number on catalog scheme:
7
For full view, you need register
Information:
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1857 Retaining Ring Pliers 1
B 1U-6683 Ring Expander 1 Start By:
Remove the pistons and connecting rods. Refer to Disassembly and Assembly, "Pistons and Connecting Rods - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Make a temporary mark on the components of the piston and connecting rod assembly. This will ensure that the components of each piston and connecting rod assembly can be reinstalled in the original cylinder. Mark the front of the piston and the front of the connecting rod. Do not interchange components.
Illustration 1 g01311807
Typical example
Place the piston and connecting rod assembly on a suitable surface with the connecting rod upward. Use Tooling (A) in order to remove retaining rings (4).
Remove piston pin (3) and connecting rod (1) from piston (2). Note: If the piston pin cannot be removed by hand, heat the piston to a temperature of 45 5 °C (113 9 °F). Do not use a torch to heat the piston.
Illustration 2 g00829406
Typical example
Illustration 3 g01311809
Place the piston on a suitable surface with the crown upward. Use Tooling (B) in order to remove compression rings (5) and (6), and oil control ring (7) from piston (2). Note: Identify the orientation of the piston rings for installation.
Illustration 4 g01311837
Typical example
Remove nuts (11) and connecting rod cap (10) from connecting rod (1).
Remove the lower half of connecting rod bearing (9) from connecting rod cap (10). Remove the upper half of connecting rod bearing (8) from connecting rod (1). Keep the bearing shells together.
Removal of the piston pin bushing in the connecting rod must be carried out by personnel with the correct training. Also special machinery is required. For more information refer to your authorized Caterpillar dealer.
Inspect the connecting rod for wear or damage. If necessary, replace the connecting rod or replace the bush for the piston pin.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1857 Retaining Ring Pliers 1
B 1U-6683 Ring Expander 1 Start By:
Remove the pistons and connecting rods. Refer to Disassembly and Assembly, "Pistons and Connecting Rods - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Make a temporary mark on the components of the piston and connecting rod assembly. This will ensure that the components of each piston and connecting rod assembly can be reinstalled in the original cylinder. Mark the front of the piston and the front of the connecting rod. Do not interchange components.
Illustration 1 g01311807
Typical example
Place the piston and connecting rod assembly on a suitable surface with the connecting rod upward. Use Tooling (A) in order to remove retaining rings (4).
Remove piston pin (3) and connecting rod (1) from piston (2). Note: If the piston pin cannot be removed by hand, heat the piston to a temperature of 45 5 °C (113 9 °F). Do not use a torch to heat the piston.
Illustration 2 g00829406
Typical example
Illustration 3 g01311809
Place the piston on a suitable surface with the crown upward. Use Tooling (B) in order to remove compression rings (5) and (6), and oil control ring (7) from piston (2). Note: Identify the orientation of the piston rings for installation.
Illustration 4 g01311837
Typical example
Remove nuts (11) and connecting rod cap (10) from connecting rod (1).
Remove the lower half of connecting rod bearing (9) from connecting rod cap (10). Remove the upper half of connecting rod bearing (8) from connecting rod (1). Keep the bearing shells together.
Removal of the piston pin bushing in the connecting rod must be carried out by personnel with the correct training. Also special machinery is required. For more information refer to your authorized Caterpillar dealer.
Inspect the connecting rod for wear or damage. If necessary, replace the connecting rod or replace the bush for the piston pin.
Caterpillar parts catalog:
Parts frame Caterpillar catalog:
120H, 120H NA, 12H, 12H NA, 135H, 135H NA, 140H, 140H NA, 140K, 14H NA, 160H, 160H NA, 160K, 215B, 235, 3116, 3126, 3126B, 3176B, 3176C, 3196, 3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3406E...
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 1290T, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 135H, 135H NA, 1390, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 143H, 14H NA, 160H, 160H ES, ...
1090, 1190, 1190T, 120M, 120M 2, 1290T, 12M 2, 12M 3, 12M 3 AWD, 1390, 140M, 140M 2, 140M 3, 140M 3 AWD, 14H, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16H NA, 16M, 2290, 235, 235D, 2390, 2391, 245, 2491...
130G, 140G, 1673C, 225, 235, 245, 3204, 3208, 3304, 3306, 3306B, 3406, 3406B, 3408, 3412, 3508, 3512, 3516, 572G, 627E, 637E, 776, 777, 815B, 826C, 920, 950, 950B, 980C, D4E, D5B, D6D, FB221, G3304, G...
9S9392
FRAME ASSEM.
D6C, D6D
D6C, D6D
6P3890
FRAME ASSEM.
D6C, D6D
D6C, D6D
9P9756
FRAME ASSEM. (R.H.)
D6D, D6F SR
D6D, D6F SR
9P9757
FRAME ASSEM. (L.H.)
D6D, D6F SR
D6D, D6F SR
8E1317
FRAME AS
D6H
D6H
8E1314
FRAME AS
D6H
D6H
9U8784
FRAME AS
D6H
D6H
8E1323
FRAME AS
D6H, D6H XL
D6H, D6H XL
5S3249
FRAME AS
561C, D5, D5B, D5E
561C, D5, D5B, D5E
561C, D5, D5B, D5E
2Y4736
FRAME AS
966C, D4E SR, D5E, D6E SR
966C, D4E SR, D5E, D6E SR
9G6037
FRAME AS-TRACK ROLLER
D6D, D6E, D6E SR, D6G, D6G SR, D6G2 XL
D6D, D6E, D6E SR, D6G, D6G SR, D6G2 XL