FRAME A 9K4600 - Caterpillar

Gauges
Illustration 3 g02680401
Hydraulic Oil Temperature (10) - The Hydraulic Oil Temperature gauge indicates the temperature of the hydraulic oil in the hydraulic oil sump for the implement circuits. If the gauge needle enters the red zone, the hydraulic oil temperature is excessive and the Advisor panel will display a warning. If necessary, reduce the load that is on the machine until the hydraulic oil temperature decreases.
Engine Coolant Temperature (11) - The water temperature regulator regulates the coolant temperatures. If the gauge needle enters the red zone, the coolant temperature is excessive and the Advisor panel will display a warning. Continued operation of the machine during the sounding of the warning alarm or the gauge needle in the red zone may damage the engine. Stop the machine in a safe place and investigate the cause.
Engine Speed (12) - The tachometer indicates the engine rpm during operation.
Fuel Level (13) - The fuel level gauge indicates the amount of fuel that remains in the fuel tank. A gauge needle in the red zone indicates a low fuel level.
Torque Converter Oil Temperature (14) - The Torque Converter Oil Temperature gauge indicates the temperature of the oil in the torque converter. If the gauge needle enters the red zone, the oil temperature is excessive and the Advisor Panel will display a warning. If necessary, reduce the load that is on the machine until the torque converter oil temperature decreases. Advisor Display Module
Illustration 4 g03201783
(15) Truck ID Button
(16) Zero Button
(17) Clear Button
(18) Reweigh Button
(19) Delay Button
(20) Left and Up Arrow Button
(21) Right and Down Arrow Button
(22) Back Arrow Button
(23) Home Button
(24) OK Button
(25) LCD Display
(26) Arrow that indicates more options
(27) Ambient Temperature
(28) Service Hours The Advisor display module is located on the right side of the dash panel. The Advisor display module interfaces with the electronic system and controls the instrument cluster.Five buttons on the right side of the Advisor display module are the user interface. Use these buttons for the following purposes: navigation buttons, menu buttons and data information.There are five LED dual function buttons to the left of the Advisor display. These buttons will be used as shortcuts to the following functions associated with the Payload System on the 992/854K.Truck ID Button (15) - The Truck ID Button will activate the Truck ID selection screen.