FRAME AS 9U2451 - Caterpillar

AFFECTED PRODUCT
Model Identification Number
785C APX00647-00649, 653-654, 658-661, 701-702, 905-908, 924-927, 1062-1065, 1111-1112, 1117-1119, 1121, 1156-1158, 1205, 1207-1208, 1302-1304
PARTS NEEDED
Qty
Part Number Description
204 8X2561 STUD
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 32% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
****Parts Stock ****
Rework all parts stock/dealer exchange 245-6468 wheel groups currenlty in dealer inventory by replacing the existing studs with the new (102) - 8X2561 press fit studs.
****Affected Product****
Remove existing 226-9404 Studs from inner flange (1) and outer flange (2). Ream/drill existing holes on the 213-3732 Wheel. Ream the existing 102 stud holes on each wheel to a size of 27.2 +/- 0.05 mm (1.071 +/- 0.002 in). Install the new 8X2561 Studs using nuts and washers to pull into place. This is a 12 hour job per wheel. (Ref: Service Magazine SEPD0826)
Image1
SERVICE CLAIM ALLOWANCES
****Parts Stock****
Submit one claim for all parts stock/dealer exchange 245-6468 wheel groups that are reworked. (102)-8X2561 Studs, 12 hr labor per wheel will be allowed for each wheel group that is reworked.
****Affected Product****
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-30 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 24.0-hour job
This is a 12 hour job per wheel. Both wheel groups must be reworked to implement this program.
PARTS DISPOSITION
****Parts Stock****
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
****Affected Product****
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.