5P8954 FRONT STRUCTURE Caterpillar parts
594H, D9H
Rating:
Alternative (cross code) number:
CA5P8954
5P-8954
5P8954
CA5P8954
5P-8954
5P8954
Weight: 0.80 pounds 0 kg.
PIPELAYER, TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$24.21
28 Sep 2018
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
CATERPILLAR GASKET KIT-FRT 5P8954 NEW
$19.02
29 May 2018
300 Hundredths Pounds
CTP: CTP
5P8954 Gasket Kit-Front Structure Fits Caterpillar 594H D9H
Warranty
Warranty
$22.58
12 May 2022
3.0[1.35] Pounds
US: ProperBuy
5P8954 Gasket Kit-Front Structure Fits Caterpillar 594H D9H
TCP Warranty
TCP Warranty
For full view, you need register
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.
Illustration 1 g01379609
Remove stud (1) .
Disconnect cable (2) and disconnect harness assembly (3) .
Remove nuts (5) and remove bracket assembly (4) .
Illustration 2 g01379635
Disconnect tube assembly (6) .
Illustration 3 g01379639
Remove drain plugs (7) and (8). Drain the engine oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change". Remove the O-ring seal from the drain plugs.
Remove nuts (10) .
Remove bolts (11) and remove oil pan (9) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Clean the sealing surface of the engine oil pan, cylinder block, housing (front), and the flywheel housing.
Illustration 4 g01379639
Position oil pan (9) and install nuts (10) .
Install bolts (11) .
Install the O-ring seal and drain plugs (7). Tighten drain plugs (7) to a torque of 70 15 N m (52 11 lb ft).
Install the O-ring seal and drain plugs (8). Tighten drain plugs (8) to a torque of 90 15 N m (66 11 lb ft).
Illustration 5 g01379635
Connect tube assembly (6) .
Illustration 6 g01379609
Position bracket assembly (4) and install nuts (5) .
Install stud (1) .
Connect cable assembly (2) .
Connect harness assembly (3) .
Fill the engine oil pan to the correct level that is indicated on the engine oil level gauge. Refer to the Operation and Maintenance Manual, "Refill Capacities and Recommendations" for the lubrication system capacity of the engine.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.
Illustration 1 g01379609
Remove stud (1) .
Disconnect cable (2) and disconnect harness assembly (3) .
Remove nuts (5) and remove bracket assembly (4) .
Illustration 2 g01379635
Disconnect tube assembly (6) .
Illustration 3 g01379639
Remove drain plugs (7) and (8). Drain the engine oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change". Remove the O-ring seal from the drain plugs.
Remove nuts (10) .
Remove bolts (11) and remove oil pan (9) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Clean the sealing surface of the engine oil pan, cylinder block, housing (front), and the flywheel housing.
Illustration 4 g01379639
Position oil pan (9) and install nuts (10) .
Install bolts (11) .
Install the O-ring seal and drain plugs (7). Tighten drain plugs (7) to a torque of 70 15 N m (52 11 lb ft).
Install the O-ring seal and drain plugs (8). Tighten drain plugs (8) to a torque of 90 15 N m (66 11 lb ft).
Illustration 5 g01379635
Connect tube assembly (6) .
Illustration 6 g01379609
Position bracket assembly (4) and install nuts (5) .
Install stud (1) .
Connect cable assembly (2) .
Connect harness assembly (3) .
Fill the engine oil pan to the correct level that is indicated on the engine oil level gauge. Refer to the Operation and Maintenance Manual, "Refill Capacities and Recommendations" for the lubrication system capacity of the engine.
Caterpillar parts catalog:
Parts front Caterpillar catalog:
2H9476
FRONT PULL HOOK GROUP
583H, 583K, D8H, D8K, D9E, D9G, D9H
583H, 583K, D8H, D8K, D9E, D9G, D9H
9P2034
FRONT CAB PLATE
D4E, D5B, D6D
D4E, D5B, D6D
9P2033
FRONT CAB PLATE
D4E, D5B, D6D
D4E, D5B, D6D
D250E II, D6C, D6D
120G, 130G, 3306B, 518, 920, 930, 941, 950, 951B, 955L, D4E
219D, 3304, 936, 950, 951B, 955L, D4D, D4E
1705859
FRONT AS
D6R, D7R XR
D6R, D7R XR
225, 518, 930R, 950B, 950B/950E, 963, D4E, D4E SR
931B, 931C, 931C II, 935B, 935C, 935C II, D3B, D3C, D3C II, D4B, D4C, D4C II, D5C, G910, IT12
910, 931B, D3B
910, 931, 931B, 943, D3, D3B