FRONT STRUCTURE 6V9222 - Caterpillar

Illustration 1 g03148701
(2) Front face of cylinder block
(6) Sleeve
Table 1
Specification for 7W-9683 Crankshaft Seal Gp
Item Qty Part Specification Description
1 2 6V-5059 O-Ring Seal Before assembly, lightly lubricate the bore that is being sealed.
3 1 190-2463 Seal As Standard rotation engine will have crankshaft seals on the rear of the engine.
Reverse rotation engine will have crankshaft seals on the front of the engine.
4 1 190-2462 Seal As Standard rotation engine will have crankshaft seals on the front of the engine.
Reverse rotation engine will have crankshaft seals on the rear of the engine.
5 1 102-4112 Crankshaft Adapter Before assembly, apply Chemtool Alpha 2000 Calcium Complex Grease to the bore to avoid moisture penetration causing corrosion.
7 1 106-2033 Crankshaft Adapter Before assembly, apply Chemtool Alpha 2000 Calcium Complex Grease to the bore to avoid moisture penetration causing corrosion.
8 2 160-8173 Wear Sleeve Before assembly, apply green Loctite 620 to inner diameter of the sleeve.
Position the sleeves on the adapters. Make sure that the arrow on the outside diameter of the sleeve is pointing in the direction of the rotation of the crankshaft.
Assemble the sleeve onto the adapter. Make sure that the adapter bottoms out against the shoulder.