FRONT AXLE GROUP 8D2980 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7575     Link Bracket     1    Start By:
Install the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Remove and Install".Note: Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g01214303
Attach Tooling (A) and a suitable lifting device to air cleaner assembly (1). The weight of air cleaner assembly (1) is approximately 48 kg (106 lb).
Illustration 2 g01214304
Loosen clamp (2) .
Remove five bolts (3) and the nuts.
Remove air cleaner assembly (1) from the machine.Installation Procedure
Illustration 3 g01214303
Attach a suitable lifting device to air cleaner assembly (1). The weight of air cleaner assembly (1) is approximately 48 kg (106 lb).
Install air cleaner assembly (1) in position.
Illustration 4 g01214304
Install five bolts (3) and the nuts.
Connect the elbow to air cleaner assembly (1) .
Tighten clamp (2) .End By: Remove the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Remove and Install".