FUEL SYSTEM 6V1186 - Caterpillar

Only operate the work tool on a host machine that has been approved by Caterpillar. Obey any lift restrictions that are applicable. Refer to Operation and Maintenance Manual, "Caterpillar Approved Machines" for more information.Only operate the work tool while you are in the seat of the host machine. The seat belt must be fastened while you operate the host machine. Only operate the controls while the engine is running. Protective glasses must be worn while you operate the host machine and while you operate the work tool. For maximum service life of the work tool and for safety, perform a thorough walk-around inspection before you operate the work tool. Refer to Operation and Maintenance Manual, "Walk Around Inspection". After you inspect the work tool and you perform any necessary repairs, you can operate the work tool.While you operate the work tool slowly in an open area, check for proper operation of all controls and all protective devices.Before you move the host machine with the work tool, ensure that no one will be endangered.Note any needed repairs during operation of the work tool. Report any needed repairs.Carry work tools low to the ground. Refer to Operation and Maintenance Manual, "Transport Position". Do not go close to the edge of a cliff, an excavation, or an overhang.Maintain control of the host machine while you operate the work tool. Do not overload the host machine beyond the capacity of the host machine. Do not overload the work tool beyond the capacity of the work tool.Know the maximum operating dimensions of your machine when the work tool is installed.Protective Equipment
In this application, the operator and the machine must have adequate protection from flying debris and falling objects.Caterpillar recommends the use of appropriate eye protection by the operator. The front windshield of the machine must be closed while you operate the work tool.Caterpillar requires the use of a Flying Object Guard System. The Flying Object Guard System protects the front of the machine and the top of the machine during demolition.Consult your Catepillar dealer for information on guarding options for your machine.