6V9725 FUEL SYSTEM Caterpillar parts
3406B, RR-250, SS-250
Rating:
Alternative (cross code) number:
CA6V9725
6V-9725
6V9725
CA6V9725
6V-9725
6V9725
Weight: 0.70 pounds 0 kg.
GEN SET ENGINE, SOIL STABILIZER,
Related part:
6V9725
GASKET KT-YM
4373200
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$44.79
27 Aug 2022
2.0[0.90] Pounds
US: TakePart
6V9725 Group-Fuel System Fits Caterpillar 3406B SR4 RR-250 SS-250
TCP Warranty
TCP Warranty
$135.72
16 Jul 2021
0.44[0.20] Pounds
US: Highway And Hea
6V9725 | Caterpillar Gasket Set - Fuel System
HHP HIGHWAY & HEAVY PARTS HHP provides parts equal or better in quality compared to the OE at a fraction of the cost. || Products are crafted with hard-wearing materials for long-lasting strength and durability. || Parts meet or exceed OEM specifications to ensure proper fit and function. || Image(s) is for illustration purposes only and may not represent the actual part. || Products are only sourced from quality certified manufacturing facilities.
HHP HIGHWAY & HEAVY PARTS HHP provides parts equal or better in quality compared to the OE at a fraction of the cost. || Products are crafted with hard-wearing materials for long-lasting strength and durability. || Parts meet or exceed OEM specifications to ensure proper fit and function. || Image(s) is for illustration purposes only and may not represent the actual part. || Products are only sourced from quality certified manufacturing facilities.
$52.69
14 Apr 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar Group-Fuel SYST 6V9725 New
For full view, you need register
Compatible equipment models: 6V9725:
Information:
Remove Oil Pump
START BY:a. remove oil pan 1. Remove oil supply tube (1) and suction bell and tube (2). 2. Remove bolts (3) that hold the oil pump to the cylinder block, and remove oil pump (4).Install Oil Pump
1. Put oil pump (1) in position on the cylinder block. Install the bolts that hold the oil pump to the cylinder block. 2. Put clean engine oil on the O-ring seals of the tubes.3. Install oil supply tube (2) and suction bell and tube (3).END BY:a. install oil panDisassemble Oil Pump
START BY:a. remove oil pump1. Remove the bolt and washer that hold the gear on the shaft. 2. Use tooling (A), and remove drive gear (1) from the shaft. Remove the key from the shaft. 3. Remove retainer (3) for the bypass valve.4. Remove the spring and bypass valve.5. Remove cover (2) from the pump body. 6. Use tooling (B), and remove the bearings from the cover. 7. Remove gears (5) from pump body (4).8. Use tooling (B), and remove the bearings from pump body (4).Assemble Oil Pump
1. Use tooling (A) to install the bearings in the pump body. Install the bearings so the joint in the bearings is 30° 15° from the center line of the oil pump outlet passage (2). 2. Install idler gear (1) and drive gear (3) in the oil pump body. Put clean engine oil on the bearings and the gears. 3. Use tooling (A), and install the bearings in cover (4). Install the bearings so the joint in the bearings is 30° 15° from the center line of the bearing bores toward oil pump outlet passage (2).4. Install bypass valve (5), spring (6) and the retainer.5. Install the key on the shaft. 6. Install gear (7) on the shaft. Install the washer and bolt that hold the gear on the shaft. Be sure the pump turns freely after assembly.END BY:a. install oil pump
START BY:a. remove oil pan 1. Remove oil supply tube (1) and suction bell and tube (2). 2. Remove bolts (3) that hold the oil pump to the cylinder block, and remove oil pump (4).Install Oil Pump
1. Put oil pump (1) in position on the cylinder block. Install the bolts that hold the oil pump to the cylinder block. 2. Put clean engine oil on the O-ring seals of the tubes.3. Install oil supply tube (2) and suction bell and tube (3).END BY:a. install oil panDisassemble Oil Pump
START BY:a. remove oil pump1. Remove the bolt and washer that hold the gear on the shaft. 2. Use tooling (A), and remove drive gear (1) from the shaft. Remove the key from the shaft. 3. Remove retainer (3) for the bypass valve.4. Remove the spring and bypass valve.5. Remove cover (2) from the pump body. 6. Use tooling (B), and remove the bearings from the cover. 7. Remove gears (5) from pump body (4).8. Use tooling (B), and remove the bearings from pump body (4).Assemble Oil Pump
1. Use tooling (A) to install the bearings in the pump body. Install the bearings so the joint in the bearings is 30° 15° from the center line of the oil pump outlet passage (2). 2. Install idler gear (1) and drive gear (3) in the oil pump body. Put clean engine oil on the bearings and the gears. 3. Use tooling (A), and install the bearings in cover (4). Install the bearings so the joint in the bearings is 30° 15° from the center line of the bearing bores toward oil pump outlet passage (2).4. Install bypass valve (5), spring (6) and the retainer.5. Install the key on the shaft. 6. Install gear (7) on the shaft. Install the washer and bolt that hold the gear on the shaft. Be sure the pump turns freely after assembly.END BY:a. install oil pump
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts fuel Caterpillar catalog:
5E9577
FUEL SYSTEM GP
RR-250, SS-250
RR-250, SS-250
8N7153
FUEL TANK & BASE GP
3406, 3406B
3406, 3406B
3406B
3412
3412, 992C
3412
8T6989
FUEL SYSTEM
3208
3208
8C6885
FUEL SYSTEM
3208
3208
245B, 3406B
2N9348
FUEL TRANSFER PUMP GROUP
3304, 3306
3304, 3306
D379, D398
6V7455
FUEL SYSTEM
3516
3516
9L9250
FUEL TRANSFER PUMP
1140, 1145, 1150, 1160, 3160
1140, 1145, 1150, 1160, 3160
3406B