FUEL INJECTION PUMP GROUP 7N5630 - Caterpillar

Illustration 1 g00728171
(1) Fuel filter base and electric priming pump (2) Toggle switch (3) Fuel line (4) Filter element (5) Bowl (6) Electrical connection for the electric priming pump (7) DrainNote: In order to open the self-ventilated drain, turn the plug counterclockwise. (8) PlugFuel Priming Pump
Illustration 2 g00749423
(8) Tighten the plug to the following torque: ... 11 2 N m (8 1 lb ft) (9) Tighten the plugs to the following torque: ... 95 10 N m (70 7 lb ft) (10) Tighten the bolts to the following torque: ... 2.25 0.25 N m (20 2 lb in) (11) Tighten the stud to the following torque: ... 10 4 N m (7 3 lb ft)Dimension (A) ... 21 0.5 mm (0.875 0.02 inch) (12) Electrical connectionVoltage ... 24.0 2.0 VDCWater Separator and Fuel Filter
Illustration 3 g00728241
Use the following procedure in order to assemble the water separator and fuel filter:
Remove the cap from the bottom of the fuel filter.
Remove the O-ring (13) from the cap. Discard the cap.
Lubricate the O-ring with clean oil. Install the O-ring into the groove of bowl (5) .
Thread the bowl onto the bottom of fuel filter (4) and tighten the bowl by hand.