FUEL PUMP HOUSING GROUP 8S5174 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1 Start By:
Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove".
Remove the lifter group. Refer to Disassembly and Assembly, "Lifter Group - Remove and Install".
Remove the flywheel housing. Refer to Disassembly and Assembly, " Flywheel Housing - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00572086
Remove bolts (1) and plate (2) from the rear of the camshaft. Remove gear (3) from the camshaft.
Illustration 2 g00572090
Rotate the engine until Marks “V” on the front of the timing gears are in alignment.
Illustration 3 g00572095
Remove bolts (5) and plate (4) from the camshaft.
Illustration 4 g00572105
Remove camshaft (6) from the cylinder block.
Illustration 5 g00572214
Use Tooling (A) and a suitable press to remove camshaft gear (7).