FUSE 3C8544 - Caterpillar

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 1P-0510 Driver Group 1
C 139-0088 Seal Installation Tool 1
D - Loctite Quick Cure Primer 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01195730
Use Tooling (B) to install lip seal (2) into the housing.
Apply Tooling (D) to shaft (10). Use a suitable press to install bearing assembly (1) on shaft (10).
Install shaft (10) and bearing assembly (1) in housing (3).
Install O-ring seal (14) on housing (3).
Install retainer (13) and bolts (11).
Position gear (4) on shaft (10). Install washer (6) and bolt (7).
Use Tooling (C) to install seal assembly (12) onto shaft (10) until the stationary cup is fully seated into housing (3).
Install impeller (5) on shaft (10). Install washer (8) and bolt (9). Tighten bolt (9) to a torque of 39 3 N m (29 2 lb ft).
Install adapter (15).End By:
Install the water pump. Refer to Disassembly and Assembly, "Water Pump - Install".