FUSE 4226095 - Caterpillar

Illustration 17 g01211386
Install element (35) . Install O-ring seal (37) . Install handle (38) . Install retaining ring (36) .
Illustration 18 g01211384
Install filter group (34) . Install retainers (33) . Install screws (30) . Install plug (31) . Tighten plug (31) to a torque of 9 0.9 N m (78 8 lb in). Install O-ring seal (32) .
Illustration 19 g01211279
Install cover (29) . Install plug (28) and the washer.
Illustration 20 g01211320
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install nut (27) . Tighten nut (27) to a torque of 18 2 N m (13 1 lb ft). Install screen assembly (25) . Install O-ring seal (23) . Install nut (26) . Install guide (22) . The total length of Dimension (X) should be 855 2 mm (33 0.07 inch). Tighten nut (26) to a torque of 29 5 N m (21 4 lb ft).
Illustration 21 g01211278
Install screen group (20) . Install O-ring seal (19) .
Illustration 22 g01211242
Install breather group (18) . Install cover assembly (17) .
Illustration 23 g01211241
Install switch assembly (16) . Tighten switch assembly (16) to a torque of 120 2.9 N m (89 2 lb ft).
Illustration 24 g01211200
Install pipe (13) . Install O-ring seal (14) . Install block (15) . Install O-ring seals (11) . Install bolts (12) .
Illustration 25 g01211198
Install gauge assembly (8) . Tighten gauge assembly to a torque of 6 1 N m (4 0.7 lb ft). Install pipes (10) . Install O-ring seals (9) .
Illustration 26 g01211189
Install switch assembly (7) . Tighten switch assembly to a torque of 71 5 N m (52 4 lb ft). Install O-ring seal (6) .
Illustration 27 g01211187
Install flange assembly (5) .
Illustration 28 g01211183
Install adapter (4) . Install filter (3) . Install flange (2) . Install pipe assembly (1) .
Illustration 29 g01211182
Attach Tooling (A) and a suitable lifting device to the hydraulic tank. Lower the hydraulic tank into the machine. The weight of the hydraulic tank is approximately 336 kg (740 lb).End By: Install the hydraulic tank and filter. Refer to Disassembly and Assembly, "hydraulic Tank and Filter - Install".