GAGE G.-DIAL 1P3535 - Caterpillar

Illustration 1 g02538278
Torque sequence for the bolts
Table 1
Specifications for 231-7266 Engine Oil Filter Gp, and 271-9263 Engine Oil Filter Gp
Item Qty Parts Specification Description
Use the tightening sequence that is shown in Illustration 1 in order to tighten the oil filter base assembly:
1. Tighten 15 bolts to 28 7 N m (21 5 lb ft).
2. Again, tighten 15 bolts to 28 7 N m (21 5 lb ft).
1 4P-9107 Hollow Stud Torque the hollow stud (1) to 68 7 N m (50 5 lb ft).
Illustration 2 g02538280
Table 2
Specifications for 231-7266 Engine Oil Filter Gp, and 271-9263 Engine Oil Filter Gp
Item Qty Parts Specification Description
2 1 7F-0216 Jam Nut Torque the jam nut to 150 20 N m (110 15 lb ft).
3 1 Torque the hose ends to 165 15 N m (120 11 lb ft).
Illustration 3 g02538279
Section B-B
Table 3
Specifications for 231-7266 Engine Oil Filter Gp, and 271-9263 Engine Oil Filter Gp
Item Qty Parts Specification Description
B - - Length for apply red Loctite 271 on the tapered end of the hollow stud 15.0 1.5 mm (0.60 0.06 inch).
4 - - Lubricate the bore of the O-ring seal lightly with lubricant that is being sealed.