GAGE- 2613687 - Caterpillar

Illustration 1 g00291969
(1) Torque for bolt with lubricant on threads ... 1080 110 N m (800 80 lb ft) (2) Outer diameter of new piston over two lands ... 101.09 0.05 mm (3.980 0.002 inch) (3) Bore of new cylinder assembly ... 101.60 + 0.13 - 0.05 mm (4.0000 + 0.005 - 0.002 inch) (4) Lubricate sealing lips with a thin covering of the lubricant that is being sealed. (5) Outer diameter of new rod ... 50.750 0.038 mm (1.9980 0.0015 inch) (6) Bore of new head over four lands ... 51.08 0.03 mm (2.011 0.001 inch)Note: Lubricate the threads with clean grease. Tighten crown (7) to a torque of 475 + 270 - 0 N m (350 + 200 - 0 lb ft). Use 1P-0808 Grease Cartridge Group to apply the grease.