GAGE LEVER SET 5P4209 - Caterpillar

27. Put identification marks on six hose assemblies (29) that are connected to the hydraulic pump for implement, steering and pilot systems. Disconnect the six hose assemblies from the hydraulic pump. The large oil supply hose which is routed between the hydraulic pump and the hydraulic oil tank should also be disconnected at the hydraulic oil tank and removed from the machine.28. Disconnect one connector (30). 29. Disconnect wiring harness (32) for the transmission hydraulic controls.30. Remove all wiring harness supports (31). 31. Disconnect two fuel lines (34) at the side of the transmission case.32. Disconnect hose assembly (33) from the side of the transmission case. 33. Disconnect hose (35) from the torque converter. 34. Disconnect two connectors (36).35. Disconnect one clamp (37), and move wiring harness (38) to the opposite side of the engine. 36. Remove bolt (39) and the clip that holds the wiring harness to the backside of