GAGE MASTER 5P6594 - Caterpillar

1. Lift the tires off the ground. Install tooling (A) under the machine so the tires make contact with the ground lightly. 2. Remove cotter pin (2) and washer (3) from tie bar (1) for the wheel lean.3. Fasten a hoist to the tie bar. 4. Remove cotter pin (5), nut (4) and bolt (6) from both ends of the tie bar. 5. Remove the tie bar from the machine. The weight is 27 kg (60 lb.).Install Leaning Wheel Linkage
1. Install tie bar for wheel lean. 2. Install bolts (2), nuts (1), washers and cotter pins at the ends of the tie bar. 3. Install washer (3) and cotter pin to control arm for wheel lean. 4. Lift the machine and remove tool (A).