GAGE A F/P 8S4618 - Caterpillar

2. Remove bolts (5) and (6) and disconnect the clips that hold the tube assemblies.3. Remove tube assemblies (1), (2) and (4) from the machine.4. Disconnect hose assembly (3) from the air compressor. 5. Disconnect tube assemblies (7) and (8) from the air compressor. 6. Remove bolts (9) and remove air compressor (10) from the engine. The weight of the air compressor is 22 kg (48 lb.).7. If a replacement of the bearing for the air compressor drive is needed, see WATER PUMP DISASSEMBLY AND ASSEMBLY.8. For AIR COMPRESSOR DISASSEMBLY AND ASSEMBLY, see Form No. SENR7594-01.Install Air Compressor
1. Put the gasket in place and install air compressor (1). Install the bolts that hold the air compressor to the engine. 2. Connect tube assemblies (2) and (3) to the air compressor. 3. Install tube assemblies (4), (5) and (7) to the engine.4. Connect hose assembly (6) to the air compressor.5. Connect clip (9) to the engine.6. Connect clip (8) that holds oil level gauge to the engine.