GAS LINE 0A3966 - Caterpillar

Edit Profile Windows
Perform the following Steps in order to modify the Profile window:
Select the "Profile" window which requires the modification.
Illustration 4 g01191160
The "Profile" Pull-down Menu
Open the "Profile" pull-down menu.
Select "Change Length" from the "Profile" pull-down menu. The "Select Profile Length" dialog appears.
Illustration 5 g01191161
The "Select Profile Length" dialog
Enter a new "Profile Length" or select a new "Profile Length" from the drop-down list.
Select the "True Scale" check box in order to display the "Profile Height" and "Length Axis" of the profile in true proportion to each other. Terminate the selection of the "True Scale" check box in order to modify the "Profile Height" and "Length axis" of the profile independently. Independent control allows exaggeration of the profile.
Click the "OK" button. The "Select Profile Length" dialog is closed and the profile is modified.
Open the "Profile" pull-down menu.
Select "Change Height" from the "Profile" menu. The "Select Profile Height" dialog appears:
Illustration 6 g01191162
The "Select Profile Height" dialogNote: The "Change Height" option is not available if "True Scale" has been selected. Refer to Step 5 above.
Enter the new height for the profile or select the new height from the drop-down list.
Press "OK". The "Select Profile Height" dialog is closed. The profile is modified.
Select the "Profile" pull-down menu. Click on the "Machine Heading" option. When the "option" button is clicked, you turn on or you turn off a check mark that is adjacent to "Machine Heading". When a check mark is adjacent to the "Machine Heading", the profile is along the heading of the machine. When no check mark is present, the profile is perpendicular to the heading of the machine.Note: The number of points along the profile cannot be modified.The profile shows the traces of various surfaces that are set up on the selected machine. For example, the trace that is colored green is the trace of the prime elevation design. The Traces are taken from the names of the files, and these names are labelled along the base of the profile. You can add and you can remove the traces from the profile.Traces that Can Be Added or Removed
Compaction (Elev. Comp.) - The trace of the current elevation is extracted from the compaction file.Current Elevation - The trace of the current elevation is extracted from the current elevation file.Design Initial - This trace is not Used.Elevation Design - The trace of the elevation is extracted from the design surface file.Hidden - The trace of a surface that represents the underlying strata of material boundaries.Original Ground - The trace of the elevation extracted from the original elevation file.Avoidance Surface - The trace of elevation of the avoidance surface extracted from the avoidance surface file.Add a Trace to a Profile
Perform the following Steps in order to add a trace to a profile:
Select the "Profile" window.
Open the "Trace" pull-down menu.
Illustration 7 g01191164
"Trace" pull-down menu
Select" Add" from the "Trace" pull-down menu. The "Add Profile Trace" dialog which is shown in Illustration 8 appears.
Illustration 8 g01518025
The "Add Profile Trace" lists all of the traces that can be added to the selected profile.
Open