0005457 GASKET Caterpillar parts
Rating:
Alternative (cross code) number:
CA0005457
000-5457
0005457
CA0005457
000-5457
0005457
Weight: 0.06 pounds 0 kg.
Information:
Rollover Protective Structure (ROPS), Falling Object Protective Structure (FOPS) or Tip Over Protection Structure (TOPS)
The ROPS/FOPS Structure (if equipped) on your machine is specifically designed, tested and certified for that machine. Any alteration or any modification to the ROPS/FOPS Structure could weaken the structure. This places the operator into an unprotected environment. Modifications or attachments that cause the machine to exceed the weight that is stamped on the certification plate also place the operator into an unprotected environment. Excessive weight may inhibit the brake performance, the steering performance and the ROPS. The protection that is offered by the ROPS/FOPS Structure will be impaired if the ROPS/FOPS Structure has structural damage. Damage to the structure can be caused by an overturn, a falling object, a collision, etc.Do not mount items (fire extinguishers, first aid kits, work lights, etc) by welding brackets to the ROPS/FOPS Structure or by drilling holes in the ROPS/FOPS Structure. Welding brackets or drilling holes in the ROPS/FOPS Structures can weaken the structures. Consult your Cat dealer for mounting guidelines.The Tip Over Protection Structure (TOPS) is another type of guard that is used on mini hydraulic excavators. This structure protects the operator in the event of a tipover. The same guidelines for the inspection, the maintenance and the modification of the ROPS/FOPS Structure are required for the Tip Over Protection Structure.Other Guards (If Equipped)
Protection from flying objects and/or falling objects is required for special applications. Logging applications and demolition applications are two examples that require special protection.A front guard needs to be installed when a work tool that creates flying objects is used. Mesh front guards that are approved by Caterpillar or polycarbonate front guards that are approved by Caterpillar are available for machines with a cab or an open canopy. On machines that are equipped with cabs, the windows should also be closed. Safety glasses are recommended when flying hazards exist for machines with cabs and machines with open canopies.If the work material extends above the cab, top guards and front guards should be used. Typical examples of this type of application are listed below:
Demolition applications
Rock quarries
Forestry productsAdditional guards may be required for specific applications or work tools. The Operation and Maintenance Manual for your machine or your work tool will provide specific requirements for the guards. Refer to Operation Maintenance manual, "Demolition" for additional information. Consult your Cat dealer for additional information.
The ROPS/FOPS Structure (if equipped) on your machine is specifically designed, tested and certified for that machine. Any alteration or any modification to the ROPS/FOPS Structure could weaken the structure. This places the operator into an unprotected environment. Modifications or attachments that cause the machine to exceed the weight that is stamped on the certification plate also place the operator into an unprotected environment. Excessive weight may inhibit the brake performance, the steering performance and the ROPS. The protection that is offered by the ROPS/FOPS Structure will be impaired if the ROPS/FOPS Structure has structural damage. Damage to the structure can be caused by an overturn, a falling object, a collision, etc.Do not mount items (fire extinguishers, first aid kits, work lights, etc) by welding brackets to the ROPS/FOPS Structure or by drilling holes in the ROPS/FOPS Structure. Welding brackets or drilling holes in the ROPS/FOPS Structures can weaken the structures. Consult your Cat dealer for mounting guidelines.The Tip Over Protection Structure (TOPS) is another type of guard that is used on mini hydraulic excavators. This structure protects the operator in the event of a tipover. The same guidelines for the inspection, the maintenance and the modification of the ROPS/FOPS Structure are required for the Tip Over Protection Structure.Other Guards (If Equipped)
Protection from flying objects and/or falling objects is required for special applications. Logging applications and demolition applications are two examples that require special protection.A front guard needs to be installed when a work tool that creates flying objects is used. Mesh front guards that are approved by Caterpillar or polycarbonate front guards that are approved by Caterpillar are available for machines with a cab or an open canopy. On machines that are equipped with cabs, the windows should also be closed. Safety glasses are recommended when flying hazards exist for machines with cabs and machines with open canopies.If the work material extends above the cab, top guards and front guards should be used. Typical examples of this type of application are listed below:
Demolition applications
Rock quarries
Forestry productsAdditional guards may be required for specific applications or work tools. The Operation and Maintenance Manual for your machine or your work tool will provide specific requirements for the guards. Refer to Operation Maintenance manual, "Demolition" for additional information. Consult your Cat dealer for additional information.
Parts gasket Caterpillar catalog:
0005412
GASKET
Caterpillar
Caterpillar
0005388
GASKET
Caterpillar
Caterpillar
0005282
GASKET
Caterpillar
Caterpillar
0005281
GASKET
Caterpillar
Caterpillar
0005262
GASKET
Caterpillar
Caterpillar
0005233
GASKET
Caterpillar
Caterpillar
0005576
GASKET
Caterpillar
Caterpillar
0005515
GASKET
Caterpillar
Caterpillar
0005514
GASKET SET
Caterpillar
Caterpillar
0005512
GASKET
Caterpillar
Caterpillar
0005511
GASKET
Caterpillar
Caterpillar
0005510
GASKET
Caterpillar
Caterpillar