GASKET 0005576 - Caterpillar

Assembly Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7575     Link Bracket     4    
Place the radiator and the oil cooler on suitable cribbing.
Illustration 1 g01051533
Place the top plate in position on oil cooler (16) and radiator (17). Install bolts (13) and bolts (14) that secure top plate (15) to the oil cooler, to the radiator, and to the side plate.
Illustration 2 g00834144
Install bottom plate (8), washers (9), and bolts (10) on the radiator and the oil cooler. Install the cooling drain tube and fitting (11) on the radiator.
Install Tooling (A) to the radiator and the oil cooler. Use a suitable lifting device in order to raise the radiator and the oil cooler. The weight of the core assemblies is approximately 125 kg (275 lb).
Illustration 3 g00834143
While the assembly is suspended carefully install baffle (6) and bolts (5) to the radiator and the oil cooler. Install lower bolts (7) for the top plate at this time.
Illustration 4 g00834142
Install the radiator and the oil cooler into the radiator guard. Remove Tooling (A) from radiator (4) and oil cooler (3).
Illustration 5 g00834141
Install retaining plates (2) and bolts (1) that secure the radiator and the oil cooler in the radiator guard.End By: Install the radiator guard, the radiator and the oil cooler. Refer to Disassembly and Assembly, "Radiator Guard, Radiator, and Oil Cooler - Install".