GASKET 0005589 - Caterpillar

The Single Adapter
The Single Adapter connects the laser receiver to the AccuGrade - Laser System. The Single Adapter provides power to the laser receiver and a CAN interface to the other components in the system.
Illustration 3 g01043354
Refer to Table 3 for the features and functions of the Single Adapter:
Table 3
Features and Functions of the Single Adapter    
Callout    Feature    Function    
31     6-pin connector     Connects the Laser Receiver to the electric mast    The Electric Mast
The AccuGrade - Laser System uses one or two Electric Masts. The Electric Mast is a telescopic receiver mount that is driven by an electric motor. The mast vertically raises and lowers the laser receivers in order to locate the laser beam.
Illustration 4 g01043265
Electric Mast
Illustration 5 g01043323
Electric Mast with Block Adapter (20) Inner Mast Tube (23) Block AdapterRefer to Table 4 shows the features and functions of the electric mast:
Table 4
Features and Functions of the Electric Mast    
Callout    Feature    Function    
20     Inner mast tube     Raises and lowers the laser receiver to locate the laser beam and to change an existing elevation setting    
21     6-socket receiver cable connector     Connects the coiled cable from the laser receiver to the electric mast    
22     10-pin control cable connector     Connects the electric mast to the main harness    
23     Block Adapter     The receiver clamp attaches to the block adapter.    The Joystick Control
Illustration 6 g01065925
Joystick Control Switch (A) Trigger Switch (B) Decrement/Auto Button (C) Increment/Manual ButtonSwitch (A) is a trigger switch that allows the operator to set an elevation offset. In order to increase the offset, press and hold the trigger switch (A) and then press the right "Increment/Manual" button (C). This action will raise the blade. In order to decrease the offset, press and hold the trigger switch (A) and then press the "Decrement/Auto" button (B). This action will lower the blade.
Table 5
JOYSTICK SWITCH FUNCTION (1)    
AUTO (B)     MAN (C)     TRIGGER (A)     FUNCTION    
X             Request Automatic Mode    
    X         Request Manual Mode    
X         X     Decrease Elevation Offset. Lower the blade    
    X     X     Increase Elevation Offset. Raise the blade.    
( 1 ) "X" denotes switch is activated