GASKET 0544473 - Caterpillar

Illustration 13 g00494110
Remove set screw (30), spring (29) and seat (28) from stem (17) .
Illustration 14 g00494111
Perform steps 5 through 14 for valves (31) and (32). Refer to the following steps for valve (33) .
Illustration 15 g00494112
Remove two bolts (35) and end cap (34) from valve (33) .
Illustration 16 g00494113
Remove O-ring (36), retainer (37), spring seat (38), spring (39) and O-ring (40) from end cap (34) .
Illustration 17 g00494114
Remove two bolts (43), end cap (42) and O-ring (41) from valve (33) .
Illustration 18 g00494115
Use a screwdriver in order to hold spool (45). Remove bolt (44) with an allen wrench.
Illustration 19 g00494117
Remove bolt (44), spring seat (46), spring (47) and spacer (48) from valve (33) .
Illustration 20 g00494118
Remove retainer (49) and O-ring (50) from valve (33). Remove two backup rings (51) from spool (45). Remove spool (45) .
Illustration 21 g00494119
Remove check valve (52) from valve (33) .
Illustration 22 g00494160
Remove poppet (53) and spring (54) from valve (33). Remove O-ring (56) and backup ring (57) from poppet (53) .
Illustration 23 g00494161
Remove relief valve (58) from inlet housing (59) .
Illustration 24 g00494162
Remove O-ring (59) from relief valve (58). Remove stem (60) from relief valve (58) .
Remove seat (62) and spring (61) from stem (60) .
Illustration 25 g00494163
Remove spool (63), plunger (64) and spring (65) from seat (62). Remove O-ring (66) and backup ring (67) from spool (63) .
Illustration 26 g00494164
Remove cap (69), nut (68) and O-rings (70) from stem (60). Remove O-ring (71), O-ring (73) and backup ring (72) from stem (60) .
Illustration 27 g00494165
Remove set screw (76), spring (75) and seat (74) from stem (60) .