GASKET 0783426 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     187-2718     Filter Wrench As     1    Start By:
Remove the left side panel. Refer to Disassembly and Assembly, "Side Panels - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01371564
Use Tooling (A) in order to remove oil filter assembly (4). Disconnect harness assembly (3). Remove bolts (1) and oil filter base (2). Remove the gasket.Installation Procedure
Illustration 2 g01371564
Install oil filter base (2) and a new gasket. Install bolts (1). Connect harness assembly (3). Install oil filter assembly (4). End By: Install the left side panel. Refer to Disassembly and Assembly, "Side Panels - Remove and Install".