GASKET KIT 0861386 - Caterpillar

Illustration 2 g03709883
461-6805 Auxiliary Hydraulic Lines Gp Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, hose assemblies, harness assemblies, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. Plugging hoses and tubes helps to prevent fluid loss, and helps to keep contaminants from entering the system.
Illustration 3 g03709885
(1) 6C-6760 Manifold (2) 149-1738 Clip (3) 187-9977 Plate (4) 187-9978 Support As (5) 187-9981 Support As (6) 250-1440 Adapter As (7) 253-6455 Tube As (8) 253-6554 Hose As (9) 6V-8398 O-Ring Seal (10) 8T-4121 Hard Washer (11) 8T-4139 Bolt (12) 8T-4185 Bolt (13) 8T-4223 Hard Washer (14) 8T-4136 Bolt (15) 8T-4139 Bolt (16) 7X-2543 Bolt (17) 8T-4183 Bolt
Install stick lines group onto the left and right side of the stick.
Unless specified, tighten all hardware and fittings to standard torque.ReferenceTorque Specifications, SENR3130, "Torque Specifications"
Illustration 4 g00687600
Personal injury or death can result from escaping fluid under pressure.Escaping fluid under pressure, even a very small pin-hole size leak, can penetrate body tissue, causing serious injury, and possible death.Always use a board or cardboard when checking for a leak.Do not check for pin hole leaks in pump or motor hoses during a steer stall condition. If fluid is injected into your skin, it must be treated by a doctor familiar with this type of injury immediately.
Inspect for fluid leaks when the installation is complete.