GASKET 0L2361 - Caterpillar

Move Design Dialog
The "Move Design" dialog contains buttons that are used to move the design. The design can be moved in the following ways:
incrementally in any direction
rotated about a reference point
moved to the position and the heading of the machine
Illustration 1 g01297480
(1) Change Design Height Buttons - The two bold purple arrow buttons are used to change the design height up or down from the current elevation. Each press of the button changes the height by 0.20 meters. If either button is pressed and held down, then the height is changed by 1.0 meter increments until the button is released.Note: Changes only occur when the Apply button (3) is pressed. (2) Arrow Buttons - The four blue arrow buttons move the design in North, South, East, and West directions. Each press of the button moves the design by 0.20 meters. If any of the buttons is pressed and held down, then the direction is changed by 1.0 meter increments until the button is released.While the design is being moved, the TIN lines (A) and the outline (B) shown in Illustration 1 are displayed in order to show the movement and the final position of the design. Note: The design is not actually moved until the Apply button (3) is pressed or the OK button (6) is pressed.
Illustration 2 g01297482
(3) Apply Button - The Apply button moves the design according to the adjustments that were made since the Move Design function was activated or since the Apply button was last pressed. (4) Rotate Buttons - The two purple circular arrow buttons rotate the design about a reference point. Each press of the button rotates the design by one degree. If one of the buttons is pressed and held down, then the design is rotated in five degree increments until the button is released. (5) Undo Button - The Undo button is used to undo all of the recent arrow movements before the movements are applied. (6) OK Button - The OK button moves the design and closes the Move Design dialog.Note: The Undo button cannot undo any design movements that have been applied using the Apply button. (7) Cancel Button - If the Cancel button is pressed, and changes have not been applied, then the changes are automatically discarded. If changes have been applied, then the operator will be given the option to keep or to discard the applied changes.Note: If changes are accidentally applied after pressing the Cancel button and choosing to discard the changes, then restarting CAESultra will return the system to the original settings. (8) Move To Here Button - The Move To Here button will move the design to the position and to the heading of the machine. The position of the design is relative to the same reference point as that used by the Rotate buttons. The changes must be applied in order to move the design. (9) Advanced Button - Press this button in order to open the Advanced dialog.Advanced Dialog
Illustration 3 g01297484
The "Advanced" dialog contains