GASKET 1088105 - Caterpillar

Disassembly Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1P-2320     Combination Puller     1    
B     1P-1857     Retaining Ring Pliers     1    
C     1P-0510     Driver Gp     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01344515
Illustration 2 g01344528
Illustration 3 g01344665
Timing marks
Remove bolts (4) and washers (5). Use Tooling (A) in order to remove gears (6). Ensure that balancer shaft (10) is protected from damage.Note: Gears (6) have different Markings (X). Refer to Illustration 3. Identify the position of the gears for installation.
Remove keys (7). Use Tooling (B) in order to remove retaining rings (8) .
Illustration 4 g01344533
Carefully tap the assembly of bearing (9) and balancer shaft (10) forward until the shaft is clear of bushing (11). Refer to Illustration 4.
Use Tooling (A) in order to remove bearing (9) from balancer shaft (10) .Note: Ensure that the balancer shaft is protected from damage.
Slide balancer shaft (10) back through bushing (11) until the shaft is clear of the balancer.
If necessary, use Tooling (C) in order to remove bushing (11) from balancer (1) .