GASKET 1206161 - Caterpillar

Install coupler valve, connectors, and tubes on the inside of the left-hand machine frame.
Illustration 7 g06242834
(1) 8T-4136 Bolt
(3) 8T-4195 Bolt
(4) 5P-7462 Clip
(5) 5P-7463 Clip
(6) 6V-0683 Grommet
(9) 7Y-2522 Plate
(10) 8T-4121 Hard Washer
(22) 148-8336 Connector As
(25) 154-6626 Bracket As
(30) 416-4796 Coupler Valve and Mounting Gp
(33) 460-9976 Hose As
(35) 461-0010 Hose As
(36) 462-7015 Hose As
(37) 494-5014 Tube As
(38) 494-5015 Tube As
(39) 494-5016 Bracket As
(43) 202-2762 Clip
Route and connect hoses as shown.
Illustration 8 g06242841
(1) 8T-4136 Bolt
(3) 8T-4195 Bolt
(10) 8T-4121 Hard Washer
(11) 8T-4137 Bolt
(26) 228-7080 Bracket As
(29) 344-5675 Nut
(34) 460-9977 Bracket As
(37) 494-5014 Tube As
(38) 494-5015 Tube As
(44) 2R-1866 Clamp
(47) 8B-6127 Clip
Install and route tubes. Connect with bracket and clips as shown.
Illustration 9 g06242844
Close-up of area B
(7) 6V-9829 Cap
(10) 8T-4121 Hard Washer
(11) 8T-4137 Bolt
(17) 096-6166 Hard Washer
(18) 112-1817 Ball Valve
(22) 148-8336 Connector As
(27) 230-7058 Bracket
(40) 525-9150 Tube As
(41) 525-9155 Tube As
Install bracket and ball valves as shown.
Illustration 10 g06242846
Area A.
(1) 8T-4136 Bolt
(10) 8T-4121 Hard Washer
(11) 8T-4137 Bolt
(27) 230-7058 Bracket
(33) 460-9976 Hose As
(34) 460-9977 Bracket As
(40) 525-9150 Tube As
(41) 525-9155 Tube As
(47) 8B-6127 Clip
Route and install tubes on the inside of the left-hand loader arm as shown.
Illustration 11 g06242850
Right-hand switch panel in the cab.
(30) 427-4963 Quick Coupler Switch Gp
Install the coupler switch in the right-hand panel in the cab.
Unless specified, tighten all hardware and fittings to standard torque.
Illustration 12 g00687600
Check for leaks.