GASKET-HEAD 1465098 - Caterpillar

Illustration 1 g00638598
Control Panel For Switchgear Conversion (1) Caterpillar Monitoring System (2) Pump stop switch (optional on 3406E and 3412C generator sets only) (3) Pump run switch (optional) (4) Alarm silence (5) Emergency stop push button (ESPB) (6) Engine control switch (ECS)The control panel for switchgear conversion is located above the generator distribution housing. The control panel consists of a main panel with indicators, meters and control switches.The control panel is used with the floor-standing switchgear. This panel provides basic engine monitoring and engine protection devices that are needed for safe and efficient operation of the generator set.The switchgear will contain all AC meters for generator voltage, amperage and frequency. The switchgear will also contain operator controls which are normally found on the generator mounted control panel. These controls are listed below.
engine control switch (ECS)
voltage adjust rheostat (VAR)
speed potentiometer (SP)
governor switch (GS)
additional operator controls which are specific to the applicationBelow, you will find the description of the control devices. Refer to Illustration 1.Caterpillar Monitoring System (1) - This system is the information center for the engine and related components. See the Operation Section, "Caterpillar Monitoring System".Pump Stop Switch (2) - The pump stop switch is optional with 3406E and 3412C generator sets only. This push button switch is used with the generator mounted automatic fuel transfer system, if equipped. The pump stop switch is used to manually stop the AC fuel transfer pump. This switch is latched down when pushed. The red indicator will now be ON. The switch can be reset by pressing the switch again. The red indicator will now be OFF.Pump Run Switch (3) - The pump run switch is optional. This momentary push button switch is used with the generator set mounted automatic fuel transfer system, if equipped. Pushing this switch will cause the generator set mounted AC fuel transfer pump to fill the generator set day tank. The green indicator will be ON when the pump is running. The pump will automatically shut OFF when the fuel reaches the high fuel level. The pump can also be turned OFF manually by the pump stop switch (2). The pump stop switch must be reset. Reset the pump stop switch by pressing the switch again.Alarm Silence Switch (4) - The alarm silence switch is used in conjunction with the optional horn. The alarm silence switch silences the horn. The horn activates when any one of the fault indicators is illuminated.Emergency Stop Push Button (5) - The emergency stop push button (ESPB) is used to shut down the engine during an emergency situation. The ESPB shuts off the fuel and activates the optional air shutoff, if equipped.Engine Control Switch (6) - The engine control switch (ECS) determines the status of the control panel. In the REMOTE position (3 o'clock), the engine will start automatically whenever a remote initiating contact is closed. The engine will shut down after the initiating contact opens.In the LOCAL position (6 o'clock), the engine will start and run as long as the ECS