GASKET 1492289 - Caterpillar

machine is equipped with a fuel transfer pump that is electric. Two examples that may cause the fuel system to lose prime are listed here:
The machine runs out of fuel.
The Fuel System Filter/Water Separator Element is replaced.Follow the steps below in order to prime the fuel system.
Ensure that the battery disconnect switch is in the ON position.
The primary fuel filter is located in the right side of the machine by the radiator. Examine the clear bowl.
The bowl must be full of fuel. If the bowl is not full of fuel, use the switch on the filter base to turn on the pump. Run the pump until the clear bowl is full of fuel.
Attempt to start the engine. If the engine starts and the engine runs rough or the engine misfires, operate the engine at low idle until the engine runs smoothly. Note: If the engine fails to start or if the engine continues to misfire or smoke, stop the engine and repeat the procedure. If the problem persists after repeating the procedure, consult your Cat dealer.