GASKET KIT 1548867 - Caterpillar

Illustration 1 g01792133
Note: All the bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all the bores for the pins. (1) Lubricate the sealing lip of four lip type seals lightly with the lubricant that is being sealed. Note: Install the following sleeve bearings in the bore so that the part number of each sleeve bearing is facing outward. (2) 234-3749 Sleeve Bearing Quantity ... 2 Inside diameter ... 130.36 0.04 mm (5.132 0.002 inch) Outside diameter ... 154.270 0.013 mm (6.0736 0.0005 inch) Installation depth of the sleeve bearing ... 9.5 0.8 mm (0.37 0.03 inch) (3) 228-5621 Sleeve Bearing Quantity ... 2 Inside diameter ... 120.32 0.04 mm (4.737 0.002 inch) Outside diameter ... 140.260 0.013 mm (5.5220 0.0005 inch) Installation depth of the sleeve bearing ... 9.5 0.8 mm (0.37 0.03 inch) (4) As required, use the following shims to adjust the maximum lateral clearance to 1.0 mm (0.04 inch): 208-1972 Shim Quantity ... 1 Thickness of the shim ... 0.5 mm (0.02 inch) 208-1973 Shim Quantity ... 2 Thickness of one shim ... 1.0 mm (0.04 inch) 208-1974 Shim Quantity ... 1 Thickness of the shim ... 2.0 mm (0.08 inch) (5) 208-1941 Pin As Pin diameter ... 139.850 0.040 mm (5.5059 0.0016 inch) Bore diameter for the pin assembly ... 140.05 0.05 mm (5.514 0.002 inch)