1568207 GASKET KIT Caterpillar parts
Rating:
Alternative (cross code) number:
CA1568207
156-8207
1568207
CA1568207
156-8207
1568207
Weight: 1 pounds 0 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
1568207 Gasket KIT (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 1.54 lbs || Dimensions: 10-13.42-16.46 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 1.54 lbs || Dimensions: 10-13.42-16.46 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
$72.16
29 Feb 2024
US: FinditParts Inc
BLUMAQ 1568207 Gasket Kit
BLUMAQ
BLUMAQ
$33.22
31 May 2021
1.5[0.68] Pounds
US: HZ INDUSTRY
Gasket KIT
HZ KITS New USA assemblied Caterpillar replacement Gasket Kit || New Replacement kit Assemblied in USA with premium quality components and materials. || Part Number is provided for reference only / not connected with original manufacturer || Pictures are for reference purposes only. Actual Kit Assemblied may vary from picture on file.
HZ KITS New USA assemblied Caterpillar replacement Gasket Kit || New Replacement kit Assemblied in USA with premium quality components and materials. || Part Number is provided for reference only / not connected with original manufacturer || Pictures are for reference purposes only. Actual Kit Assemblied may vary from picture on file.
For full view, you need register
Information:
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Inspect the pins of the crankshaft for damage. If the crankshaft is damaged, replace the crankshaft or recondition the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Remove" and Disassembly and Assembly, "Crankshaft - Install" for the correct procedure. Ensure that the connecting rod bearings are clean and free from wear or damage. If necessary, replace the connecting rod bearings.
Illustration 1 g03337903
Clean the bearing surface of connecting rod (1) and connecting rod cap (5). Ensure that Number (X) on connecting rod cap (5) aligns with Number (X) on connecting rod (1).
Install upper connecting rod bearing (3) to connecting rod (1). Lubricate the bearing surface of the connecting rod bearing with clean engine oil.
Carefully pull connecting rod (1) against the crankshaft pin. Note: Use suitable tubing on connecting rod bolts (2) in order to protect the crankshaft journals. The sharp edges of the connecting rod bolts could damage the crankshaft journals.
Clean the connecting rod cap. Install lower connecting rod bearing (4) to connecting rod cap (5).
Lubricate the pin of the crankshaft and lubricate lower connecting rod bearing (3) with clean engine oil.
When the connecting rod caps are installed, ensure that the identification marks are aligned.
Install connecting rod cap (5).
Install nuts (4) hand tight. Tighten nuts (4) to a torque of 52 N m (38 lb ft).
Ensure that the installed connecting rod assembly has tactile side play. Carefully rotate the crankshaft in order to ensure that there is no binding. Note: If all connecting rod bearings require replacement, the procedure can be carried out on two cylinders at the same time. The procedure can be carried out on the following pairs of cylinders. 1 with 4 and 2 with 3. Ensure that both pairs of the connecting rod bearings are installed before changing from one pair of cylinders to another pair of cylinders. Refer to Disassembly and Assembly, "Connecting Rod Bearings - Remove" for more information.End By:
Install the suction pipe. Refer to Disassembly and Assembly, "Engine Oil Pump - Install" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Inspect the pins of the crankshaft for damage. If the crankshaft is damaged, replace the crankshaft or recondition the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Remove" and Disassembly and Assembly, "Crankshaft - Install" for the correct procedure. Ensure that the connecting rod bearings are clean and free from wear or damage. If necessary, replace the connecting rod bearings.
Illustration 1 g03337903
Clean the bearing surface of connecting rod (1) and connecting rod cap (5). Ensure that Number (X) on connecting rod cap (5) aligns with Number (X) on connecting rod (1).
Install upper connecting rod bearing (3) to connecting rod (1). Lubricate the bearing surface of the connecting rod bearing with clean engine oil.
Carefully pull connecting rod (1) against the crankshaft pin. Note: Use suitable tubing on connecting rod bolts (2) in order to protect the crankshaft journals. The sharp edges of the connecting rod bolts could damage the crankshaft journals.
Clean the connecting rod cap. Install lower connecting rod bearing (4) to connecting rod cap (5).
Lubricate the pin of the crankshaft and lubricate lower connecting rod bearing (3) with clean engine oil.
When the connecting rod caps are installed, ensure that the identification marks are aligned.
Install connecting rod cap (5).
Install nuts (4) hand tight. Tighten nuts (4) to a torque of 52 N m (38 lb ft).
Ensure that the installed connecting rod assembly has tactile side play. Carefully rotate the crankshaft in order to ensure that there is no binding. Note: If all connecting rod bearings require replacement, the procedure can be carried out on two cylinders at the same time. The procedure can be carried out on the following pairs of cylinders. 1 with 4 and 2 with 3. Ensure that both pairs of the connecting rod bearings are installed before changing from one pair of cylinders to another pair of cylinders. Refer to Disassembly and Assembly, "Connecting Rod Bearings - Remove" for more information.End By:
Install the suction pipe. Refer to Disassembly and Assembly, "Engine Oil Pump - Install" for the correct procedure.
Parts gasket Caterpillar catalog:
Caterpillar
1567376
GASKET KIT
Caterpillar
Caterpillar
Caterpillar
1563102
GASKET
Caterpillar
Caterpillar
1560948
GASKET KIT
Caterpillar
Caterpillar
1560946
GASKET KIT
Caterpillar
Caterpillar
1572589
GASKET KIT
Caterpillar
Caterpillar
1571292
GASKET KIT
Caterpillar
Caterpillar
1570651
GASKET-RIM
Caterpillar
Caterpillar
1570251
GASKET
Caterpillar
Caterpillar
Caterpillar
Caterpillar