GASKET KIT 1581452 - Caterpillar

Illustration 64 g01515109
Remove thrust washer (121) and bearing (122) from planetary gear (120) .
Repeat Step 65 through Step 67 for the remaining planetary gears (120) .
Illustration 65 g01515127
Illustration 66 g01515140
Turn over planetary carrier (98) . The weight of planetary carrier (98) is approximately 55 kg (122 lb). Remove retaining ring (123) . Turn over planetary carrier (98) . The weight of planetary carrier (98) is approximately 55 kg (122 lb). Use Tooling (G) in order to remove bearing (124) . Remove seal ring (125) .
Illustration 67 g01515146
Use Tooling (A) and a suitable lifting device in order to remove plate (126) . The weight of plate (126) is approximately 15 kg (33 lb). Remove dowels (127) , if necessary.
Illustration 68 g01515149
Remove discs (128) and plates (129) .Note: Note the quantity and the order of discs (128) and plates (129) .
Illustration 69 g01515281
Use a suitable lifting device in order to remove planetary carrier (130) . The weight of planetary carrier (130) is approximately 32 kg (70 lb).
Illustration 70 g01516050
Remove ring seal (131) . Remove ring seal (132) . Release lock ring (133) . Use Tooling (D) and a suitable lifting device in order to remove planetary carrier (130) from ring gear (134) . The weight of planetary carrier (130) is approximately 25 kg (55 lb).
Illustration 71 g02076333
Remove retaining ring (134A) . Remove sleeve (134B) from planetary carrier (130) .
Illustration 72 g01515152
Drive pin (135) into shaft (136) . Remove shaft (136) . Remove planetary gear (137) .
Remove pin (135) from shaft (136) .Note: Do not reuse pin (135) .
Illustration 73 g01515336
Remove thrust washers (138) and bearing (139) from planetary gear (137) .
Illustration 74 g01515853
Remove piston (140) from clutch housing (141) .
Illustration 75 g01515867
Remove ring seal (142) and ring seal (143) .
Illustration 76 g01515872
Illustration 77 g01516123
Use two people in order to turn over clutch housing (141) . The weight of clutch housing (141) is approximately 44 kg (96 lb). Remove retaining ring (144) .
Use two people in order to turn over clutch housing (141) . The weight of clutch housing (141) is approximately 44 kg (96 lb). Use Tooling (G) in order to remove bearing (145) .