17060091 GASKET Caterpillar parts
CB-414, CB-614
Rating:
Alternative (cross code) number:
CA17060091
1706-0091
17060091
CA17060091
1706-0091
17060091
VIBRATORY COMPACTOR,
Number on catalog scheme:
26
For full view, you need register
Information:
Removal Procedure
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 1 g00915173
Remove bolts (1). Remove fuel priming pump (2) and the gasket. Installation Procedure
Illustration 2 g00915173
Install the gasket and fuel priming pump (2). Install bolts (1). Tighten bolts (1) to a torque of 27 8 N m (20 6 lb ft).
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 1 g00915173
Remove bolts (1). Remove fuel priming pump (2) and the gasket. Installation Procedure
Illustration 2 g00915173
Install the gasket and fuel priming pump (2). Install bolts (1). Tighten bolts (1) to a torque of 27 8 N m (20 6 lb ft).
Caterpillar parts catalog:
Parts gasket Caterpillar catalog:
120G, 12G, 130G, 140G, 14G, 160G, 16G, 215, 225, 229, 229D, 235, 235B, 235C, 245, 245B, 3204, 3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 375, 508, 515, 518, 518C, 528, 572G, 578, 613C, 615, 6...
225, 225D, 3208, 613B, 613C, CB-614, CS-551, FB221, PR-1000, PS-500
1140, 1145, 1150, 1160, 215, 225, 227, 229, 3160, 3204, 3208, 613B, 613C, 910, 916, 926, 931B, 943, 953, CB-614, CS-551, D4HTSK II, D5C, FB221, IT28, PR-1000, PS-500
1140, 1145, 1150, 1160, 225, 3145, 3150, 3160, 3208, 613, 613B, 613C, CB-614, CS-551, FB221, PR-1000, PS-500
225, 225D, 3208, CB-614, CS-551, FB221, PR-1000, PS-500
1140, 1145, 1150, 1160, 215, 225, 3160, 3204, 3208, 613, 613B, 613C, 910, 916, 926, 931B, 943, 953, CB-614, CS-551, D4HTSK II, FB221, PR-1000, PS-500
225, 231D, 3160, 3208, 613B, 613C, CB-614, CS-551, PR-1000, PS-500
225, 231D, 3160, 3208, 518, 613B, 613C, CB-614, CS-551, PR-1000, PS-500
3208, 613C, CB-614, PR-1000
62000249
GASKET END CAP
CB-614
CB-614
E681248
GASKET, END CAP
CB-514, CB-614
CB-514, CB-614
774887
GASKET
CB-614
CB-614
E681550
GASKET
CB-614
CB-614
62000051
GASKET, FRONT COVER
CB-514, CB-614
CB-514, CB-614
B128236
GASKET, COVER R.H.
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
A127010
GASKET, COVER
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
A071669
GASKET, HUB CAP
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
E680301
GASKET
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
E680289
GASKET
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
E681408
GASKET
CB-514, CB-614
CB-514, CB-614