GASKET KIT - F 1740739 - Caterpillar

Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, and filters. The user is also responsible for the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components. Use fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Before each consecutive interval is performed, all maintenance from the previous interval must be performed.Note: The maintenance schedule below is applicable to Cat parts only.When Required
Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
Fuel System Primary Filter/Water Separator - Clean/Replace
Fuel System Primary Filter/Water Separator - Drain
Maintenance Recommendations
Daily
Coolant Level - Check
Engine Oil Level - Check
Driven Equipment - Check
Walk-Around Inspection
Every 100 Service Hours
Fuel Filter Differential Pressure - Check
Fuel Tank Water and Sediment - Drain
Initial 250 Service Hours
Engine Valve Lash - Check
Every 250 Service Hours
Coolant Sample (Level 1) - Obtain
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Oil Sample - Obtain
Hoses and Clamps - Inspect/Replace
Every 1000 Service Hours
Engine Crankcase Breather - Clean
Engine Oil and Filter - Change
Fuel System Primary Filter/Water Separator - Clean/Replace
Fuel System Primary Filter/Water Separator - Drain
Fuel System Secondary Filter - Replace
Every 2000 Service Hours
Coolant Sample (Level 2) - Obtain
Crankshaft Vibration Damper - Inspect
Driven Equipment - Check
Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
Engine Mounts - Inspect
Engine Protective Devices - Check
Fumes Disposal Filter Element - Replace
Speed Sensor - Clean/Inspect
Turbocharger - Inspect
Every 4000 Service Hours
Coolant (DEAC) - Change
Engine Valve Lash - Check
Thermostatic Valve - Inspect
Electric Starting Motor Brush - Clean
Starting Motor - Inspect
Every 6000 Service Hours
Coolant Extender (ELC) - Add
Every 8000 Service Hours
Prelube Pump - Inspect
Every 9000 Service Hours
Fuel Pump (High Pressure) - Replace
Water Pump - Inspect
Water Temperature Regulator (SCAC) - Replace
Every 12 000 Service Hours
Coolant (ELC) - Change
Crankshaft Vibration Damper seals - Replace
Fuel Injector - Replace
Water Temperature Regulator (JW) - Replace
Overhaul
Aftercooler Core - Inspect/Clean/Test
Overhaul Considerations
Overhaul (Intermediate)
Overhaul (Major)