GASKET 1G6080 - Caterpillar

Monitor Display (CMPD) Fluid Transaction Functionality
New functionality has been added for the operator of a fluid dispensing vehicle. Select the fluid type from a list and enter the quantity of fluid being dispensed to a target machine. The new window will allow an operator to select only one target machine from a list. The list of machines is sorted based on GPS proximity only when machine positions are available via the "AllMachinePosition" message. Machines can be sorted alphabetically, when machine positions are not available.This functionality allows the operator to dispense fuel to machines selected from a list on the display. The list of machines is sorted based on GPS proximity when machine positions are available via the "AllMachinePosition" message. Machines can be sorted alphabetically, when machine positions are not available.As a mobile fueling platform functionality in the office will vary based on version, full Office functionality is available with version 4.0 and later. This feature is intended for use with stationary fueling only in Office versions 4.0 and later.To access the Fluids Transaction window, Id 81 must be added to the TopeWinCfg.txt file as an additional screen. Default TopeWinCfg.txt files are available in the "MineStar" downloads section of SISWeb and are recommended for use when using this feature.
Illustration 1 g03665673
Fluid screen
For operational information of the fluid transaction function, refer to the Systems Operation, "Operator Utilities for Fuel Truck" section of this manual.Perform the following procedure:
Press "Tab" button to access "Fluids" screen. Refer to Illustration 1. Note: Use only the touch screen to make entries on the "Fluids" screen.
Illustration 2 g03431357
Select the machine to service from the "ID" drop-down menu.
Illustration 3 g03431374
Enter the hours of the machine to be serviced in the "SMU" keypad window.
Illustration 4 g03431392
Select the "CATEGORY".
Illustration 5 g03431439
Select the "ITEM".
Illustration 6 g03431463
Select "QUANTITY" and enter the amount dispensed into the keypad.
Illustration 7 g03431472
Press "Add" to add the item dispensed to the list.
Repeat these steps to add additional fluids to the same machine.
Illustration 8 g03431477
Press "Send" to send list to the office when servicing is completed.
Illustration 9 g03432486
Verify the completion of this transaction by pressing "Yes" Note: The list will clear automatically.
Illustration 10 g03432510
Screen shot to clear entire list
Illustration 11 g03432521
Screen shot to clear line entry
An item can only be entered once per list. If additional amount of the same item is to be added during the same transaction, the original item line must be deleted and re-entered with the total amount. You are able to clear the entire list, refer to Illustration 10. If removal of one line is needed, refer to Illustration 11.The following alarms for Fleet have been added to the software:
Assignment from the Office
End of Delay
Message from the Office