GASKET 1M1940 - Caterpillar

Illustration 1 g03454196
Table 1
Specification for 207-1558 Electric Starting Motor Gp    
Item     Qty     Part     Specification Description    
B     -     -     Clearance between the pinion and the housing is
9.1 mm (0.36 inch).    
1     1     6V-8188 Nut     Battery terminal. A maximum of three cable terminals or wire terminals may be used with the battery terminal nut. A maximum of two of the cable terminals may be equal to or greater than 0 AWG.    
Torque to
30.5 3.5 N m (270.0 31.0 lb in).
2     2     6V-8188 Nut     Ground terminal. Torque to
30.5 3.5 N m (270.0 31.0 lb in).    
3     1     6V-8378 Nut     Ground terminal. Torque to
2.25 0.25 N m (19.91 2.21 lb in).    
4     1     6V-8378 Nut     Switch terminal. Torque to
2.25 0.25 N m (19.91 2.21 lb in).    
5     1     6V-8188 Nut     Motor terminal. Torque to
30.5 3.5 N m (270.0 31.0 lb in).    
6     -     -     Motor frame terminal. Torque to
8 3 N m (71 27 lb in).    
-     -     -     Pull-in current at 20 V and
25° C (77° F) is 57 Amp.    
-     -     -     Hold-in current at 20 V and
25° C (77° F) is 16 Amp.    
-     -     -     When the electric starting motor is viewed from the pinion end, the motor rotates in the clockwise direction.    
-     -     -     No load conditions at
25 °C (77 °F):    
Speed is 7643 1683 rpm.
Current draw is 76.5 14.5 Amp.
Voltage is 23 VDC.