GASKET 1S2616 - Caterpillar

Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1855 Retaining Ring Pliers 1
B 9S-9152 Bearing Puller Gp 1
C 1P-0510 Driver Gp 1
D 1P-1861 Retaining Ring Pliers 1
E 1P-1863 Retaining Ring Pliers 1
F 8B-7551 Bearing Puller Gp 1
G 277-7088 Spanner Socket 1
H 8H-0663 Bearing Puller Gp 1 Start By:
Remove the air starting motor. Note: The individual parts of the air starting motor are nonserviceable. An overhaul kit must be purchased in order to service the air starting motor.
Mark all the adjacent parts of the housing for the air starting motor for assembly purposes.
Illustration 1 g01170823
Remove bolts (1) and remove drive housing (2) from gearbox housing (3).
Illustration 2 g01170843
Illustration 3 g01171324
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Note: When bolt (4) is removed spring tension will be released from drive assembly (7).
Position drive housing (2) into a suitable press. Remove bolt (4) and washer (5). Remove pinion gear (6). Slowly release the suitable press in order to release the spring tension on drive assembly (7).
Illustration 4 g01170867
Remove drive assembly (7), spring (8), and washer (9) from drive housing (2).
Illustration 5 g01171383
Use Tooling (A) and remove retaining ring (10) from drive assembly (7).
Illustration 6 g01171410
Use Tooling (B), Tooling (C), and a suitable press in order to remove bearing (11) from drive assembly (7).
Illustration 7